HP 54201A scope input failure
Just picked up an HP 54201A digital scope. It basically works but
both input channels are dead. Will not recognize any inputs, and the input self test fails. Don't have a service manual (and have been unable to download one...on dial up here), and don't want to pay a bunch of $$$'s for one to find out the hybrid circuits are bad. Can anyone provide *just* the schematics for the input circuitry? Has anyone else here been able to fix this problem? Steve |
HP 54201A scope input failure
Steve wrote:
Just picked up an HP 54201A digital scope. It basically works but both input channels are dead. Will not recognize any inputs, and the input self test fails. Don't have a service manual (and have been unable to download one...on dial up here), and don't want to pay a bunch of $$$'s for one to find out the hybrid circuits are bad. Can anyone provide *just* the schematics for the input circuitry? Has anyone else here been able to fix this problem? Steve HI, Look for O/C inductors on the input stage - they are just about the first component that the signal passes through, you'll need good eyes - they'll be tiny.... |
All times are GMT +1. The time now is 06:42 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter