Panasonic VCR (NV-FJ620), heads dirty/plays fast?
 

Hi All,

Have a problem, hopefully someone might know what is going on.

Was playing a tape the other day on our Panasonic NV-FJ620 and all of
a sudden the picture split into 3/4 segments and went grey etc.
Anyway, I opened it up and cleaned the heads with iso. alcohol (eject,
audio and video heads) - video ones were quite dirty. After, the
picture was improved - but still not perfect (and the audio kept
dropping out).

Ejected, the put the tape back - it spooled (i.e. the rollers pushed
the tape against the drum) and started moving, but there was no
picture and the counter showed it was going too fast (like 3/4 seconds
in 1 actual second). This happened as I put the tape in, I didn't
press play etc - and in fact, if I try to press play, stop, eject
nothing happens while this is happening. You can see the tape
advancing (in the casette itself) and it going through, and no way of
stopping it. It basically continues to do this until the tape reaches
the end - then you can press play/eject etc.

Could this have happened after I cleaned the heads? Does anyone know
what would cause the above issue and how I could fix it?


Thanks heaps,
Andrew