Roland VR 760 piano
 

Bit of black plastic floating around free inside the case, could have
dropped in there from somewhere else or is it something important? no
obvious home for it
40x 13x 0.5mm shiny black


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

Roland VR 760 piano
 

On Thu, 14 May 2009 10:23:04 +0100, "N_Cook"
wrote:

Bit of black plastic floating around free inside the case, could have
dropped in there from somewhere else or is it something important? no
obvious home for it
40x 13x 0.5mm shiny black

No idea, but posting a photo (and a link to the photo) would probably
be very helpful.

Roland VR 760 piano
 

PeterD wrote in message
...
On Thu, 14 May 2009 10:23:04 +0100, "N_Cook"
wrote:

Bit of black plastic floating around free inside the case, could have
dropped in there from somewhere else or is it something important? no
obvious home for it
40x 13x 0.5mm shiny black

No idea, but posting a photo (and a link to the photo) would probably
be very helpful.

I like it, would you prefer a black background?
7 words summarise the picture, 1000 words not needed
40x 13x 0.5mm featurelass shiny black plastic

Roland VR 760 piano
 

In similar vein. I was just trying to find details of simulated leather,
here is a product picture of some, apparently

http://www.online-fabrics.co.uk/shop...76d070d19bd56b
f23e92f.jpg

Roland VR 760 piano
 

N_Cook wrote:
Bit of black plastic floating around free inside the case, could have
dropped in there from somewhere else or is it something important? no
obvious home for it
40x 13x 0.5mm shiny black

Could have been glued over the rear of a PCB with exposed mains connections?

--
Adrian C

Roland VR 760 piano
 

Adrian C wrote in message
...
N_Cook wrote:
Bit of black plastic floating around free inside the case, could have
dropped in there from somewhere else or is it something important? no
obvious home for it
40x 13x 0.5mm shiny black

Could have been glued over the rear of a PCB with exposed mains
connections?

--
Adrian C


I made a careful inspection of the SMPS and the intermediary mains carrying
board but nothing looked suspect. Whatever it was , was not glued in or at
least there was no trace of glue on the plastic


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/