DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Rubidium lamp source (https://www.diybanter.com/electronics-repair/273736-rubidium-lamp-source.html)

[email protected] March 18th 09 06:52 PM

Rubidium lamp source
 
I'm looking to do some tinkering with rubidium time sources. It seems
that the rubidium lamp is the toughest thing to get. Does anyone know
where one can buy rubidium lamps for this type of thing? As I
understand it, they don't need to have electrodes on them, just the
rubidium in a gas state.

Mike

GregS[_3_] March 18th 09 07:02 PM

Rubidium lamp source
 
In article , wrote:
I'm looking to do some tinkering with rubidium time sources. It seems
that the rubidium lamp is the toughest thing to get. Does anyone know
where one can buy rubidium lamps for this type of thing? As I
understand it, they don't need to have electrodes on them, just the
rubidium in a gas state.

Mike


Don't know, but why would you want to tinker? It seems the Rubidium stuff has been
widely used for different things. I used to play with the Cesium and Rubidium
standards at a tracking station. The thing about time standards, the near
term sability is only as good as a good xtal oscillator. Atomic
standards are for long term stability.

greg

Spehro Pefhany April 6th 09 04:35 AM

Rubidium lamp source
 
On Wed, 18 Mar 2009 11:52:22 -0700 (PDT), the renowned
wrote:

I'm looking to do some tinkering with rubidium time sources. It seems
that the rubidium lamp is the toughest thing to get. Does anyone know
where one can buy rubidium lamps for this type of thing? As I
understand it, they don't need to have electrodes on them, just the
rubidium in a gas state.

Mike


You can get complete 10MHz rubidium standards on eBay for very
reasonable prices ($100-$200). Taken from cell phone base stations, I
think.


Best regards,
Spehro Pefhany
--
"it's the network..." "The Journey is the reward"
Info for manufacturers: http://www.trexon.com
Embedded software/hardware/analog Info for designers: http://www.speff.com


All times are GMT +1. The time now is 10:03 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter