Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 20
Default NiMH batteries in a 2-way radio

I've been searching for a two-way radio (walkie talkie) and I've found
one I really like. This particular one works on three AAA alkaline
batteries. For $10 more I can get the same radio but with rechargeable
NiMH batteries and a recharger. The recharger just plugs right into
the radio. Since I already have rechargeable batteries I figured I'd
get the cheaper one without the recharger. I was looking at the
instructions and it says this: Only use our NiMH battery.
Does that mean I'm only supposed to use their NiMH battery if I'm
using the recharger? Or does it mean I shouldn't use any NiMH battery
at all? I don't see why there would be a problem if I charge my
batteries in my own separate charger then use them in the radio. I
contacted customer service but I really don't trust any customer
service representatives to give me an honest answer. They're just paid
to say whatever will make the company more money.
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,833
Default NiMH batteries in a 2-way radio

You can use any batteries you like.

They want you to use their batteries with their recharger because A: they
know their batteries will work properly with their recharger, and B: they
want you to spend more money.

But there's nothing wrong with using NiMH cells from somebody else, in
another charger.


  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 20
Default NiMH batteries in a 2-way radio

Jo wrote:
I've been searching for a two-way radio (walkie talkie) and I've found
one I really like. This particular one works on three AAA alkaline
batteries. For $10 more I can get the same radio but with rechargeable
NiMH batteries and a recharger. The recharger just plugs right into
the radio. Since I already have rechargeable batteries I figured I'd
get the cheaper one without the recharger. I was looking at the
instructions and it says this: Only use our NiMH battery.
Does that mean I'm only supposed to use their NiMH battery if I'm
using the recharger? Or does it mean I shouldn't use any NiMH battery
at all? I don't see why there would be a problem if I charge my
batteries in my own separate charger then use them in the radio. I
contacted customer service but I really don't trust any customer
service representatives to give me an honest answer. They're just paid
to say whatever will make the company more money.


Use what you have can't hurt.
  #4   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 41
Default NiMH batteries in a 2-way radio


"Nelson" wrote in message
.com...
On Wed, 18 Mar 2009 14:03:53 -0400, mark wrote
(in article ):

Jo wrote:
I've been searching for a two-way radio (walkie talkie) and I've found
one I really like. This particular one works on three AAA alkaline
batteries. For $10 more I can get the same radio but with rechargeable
NiMH batteries and a recharger. The recharger just plugs right into
the radio. Since I already have rechargeable batteries I figured I'd
get the cheaper one without the recharger. I was looking at the
instructions and it says this: Only use our NiMH battery.
Does that mean I'm only supposed to use their NiMH battery if I'm
using the recharger? Or does it mean I shouldn't use any NiMH battery
at all? I don't see why there would be a problem if I charge my
batteries in my own separate charger then use them in the radio. I
contacted customer service but I really don't trust any customer
service representatives to give me an honest answer. They're just paid
to say whatever will make the company more money.


Use what you have can't hurt.


I have a couple of Motorola Talk-Abouts. When I use rechargeables
other than those included in the sealed pack, the battery indicator
registers only "partly charged" even when they are fully charged; and
they don't seem to last as long. Might have something to do with the
voltage. I know NiCad are only 1.2 and register low if the device is
expecting alkaline 1.5's.

--
Nelson


Yes that is true.. But your radios are designed for rechargeables. As long
as they are the same type of cells (NIMH) you shouldnt have any problems.
Its not like the company makes their own special batteries to go with the
radios. At best they buy batteries from some chinese company and pay them
to lable the batteries with a custom logo. Like this "Danger:These are the
only batteries you can use with this radio. If other battiers are used this
device will explode."


  #5   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 132
Default NiMH batteries in a 2-way radio

On Fri, 20 Mar 2009 03:21:03 +0900, "Michael Kennedy"
wrote:


"Nelson" wrote in message
b.com...
On Wed, 18 Mar 2009 14:03:53 -0400, mark wrote
(in article ):

Jo wrote:
I've been searching for a two-way radio (walkie talkie) and I've found
one I really like. This particular one works on three AAA alkaline
batteries. For $10 more I can get the same radio but with rechargeable
NiMH batteries and a recharger. The recharger just plugs right into
the radio. Since I already have rechargeable batteries I figured I'd
get the cheaper one without the recharger. I was looking at the
instructions and it says this: Only use our NiMH battery.
Does that mean I'm only supposed to use their NiMH battery if I'm
using the recharger? Or does it mean I shouldn't use any NiMH battery
at all? I don't see why there would be a problem if I charge my
batteries in my own separate charger then use them in the radio. I
contacted customer service but I really don't trust any customer
service representatives to give me an honest answer. They're just paid
to say whatever will make the company more money.

Use what you have can't hurt.


I have a couple of Motorola Talk-Abouts. When I use rechargeables
other than those included in the sealed pack, the battery indicator
registers only "partly charged" even when they are fully charged; and
they don't seem to last as long. Might have something to do with the
voltage. I know NiCad are only 1.2 and register low if the device is
expecting alkaline 1.5's.

--
Nelson


Yes that is true.. But your radios are designed for rechargeables. As long
as they are the same type of cells (NIMH) you shouldnt have any problems.
Its not like the company makes their own special batteries to go with the
radios. At best they buy batteries from some chinese company and pay them
to lable the batteries with a custom logo. Like this "Danger:These are the
only batteries you can use with this radio. If other battiers are used this
device will explode."

They may not have their own special batteries, but they may have a
pack that contains 5 NiCD cells vs 4 alkalines. ...both approx 6
volts. (That's a general comment... I don't know about Motorola
Talk-Abouts).


  #6   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 742
Default NiMH batteries in a 2-way radio

In article , wrote:
On Fri, 20 Mar 2009 03:21:03 +0900, "Michael Kennedy"
wrote:


"Nelson" wrote in message
eb.com...
On Wed, 18 Mar 2009 14:03:53 -0400, mark wrote
(in article ):

Jo wrote:
I've been searching for a two-way radio (walkie talkie) and I've found
one I really like. This particular one works on three AAA alkaline
batteries. For $10 more I can get the same radio but with rechargeable
NiMH batteries and a recharger. The recharger just plugs right into
the radio. Since I already have rechargeable batteries I figured I'd
get the cheaper one without the recharger. I was looking at the
instructions and it says this: Only use our NiMH battery.
Does that mean I'm only supposed to use their NiMH battery if I'm
using the recharger? Or does it mean I shouldn't use any NiMH battery
at all? I don't see why there would be a problem if I charge my
batteries in my own separate charger then use them in the radio. I
contacted customer service but I really don't trust any customer
service representatives to give me an honest answer. They're just paid
to say whatever will make the company more money.

Use what you have can't hurt.

I have a couple of Motorola Talk-Abouts. When I use rechargeables
other than those included in the sealed pack, the battery indicator
registers only "partly charged" even when they are fully charged; and
they don't seem to last as long. Might have something to do with the
voltage. I know NiCad are only 1.2 and register low if the device is
expecting alkaline 1.5's.

--
Nelson


Yes that is true.. But your radios are designed for rechargeables. As long
as they are the same type of cells (NIMH) you shouldnt have any problems.
Its not like the company makes their own special batteries to go with the
radios. At best they buy batteries from some chinese company and pay them
to lable the batteries with a custom logo. Like this "Danger:These are the
only batteries you can use with this radio. If other battiers are used this
device will explode."

They may not have their own special batteries, but they may have a
pack that contains 5 NiCD cells vs 4 alkalines. ...both approx 6
volts. (That's a general comment... I don't know about Motorola
Talk-Abouts).



The FRS radios I like opperate off AA and have a manual volume control.
Thats how my Icom FRS is. I have a pair of Midland FRS/GMRS
that opperate off AAA and have a silly PB volume control. Just awfull.

I can only say it migh be about battery mahr. Its is VERY nice though to have a charging
stand.

greg
  #7   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 533
Default NiMH batteries in a 2-way radio


I have a couple of Motorola Talk-Abouts. When I use rechargeables
other than those included in the sealed pack, the battery indicator
registers only "partly charged" even when they are fully charged; and
they don't seem to last as long. Might have something to do with the
voltage. I know NiCad are only 1.2 and register low if the device is
expecting alkaline 1.5's.

Mine have a menu option to adjust the battery indicator for either
alkaline or NiMH batteries. Check yours for same....

jak
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
AA NiMh batteries [email protected] UK diy 22 June 9th 07 01:25 PM
bit OT but are NH batteries the same as NiMh ?? Mr Fixit UK diy 6 January 30th 06 05:35 PM
NiMH batteries John Rouse UK diy 2 May 3rd 04 06:56 PM
Charging NimH batteries while in a device. Fritz Electronics 2 February 13th 04 11:23 PM
NICD vs NIMH batteries [email protected] UK diy 12 January 28th 04 01:09 PM


All times are GMT +1. The time now is 03:33 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"