Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Magneto coil construction/ rewind
Using polythene film canabalised from 0.47uF, 1000V capacitor for interlayer
insulation. 0.01mm thick film and 1000V rating, what rating for pulsed rather than DC use in the HT re-winding of a magneto, original interlayer winding paper and cloth and lacquer. data from the end of http://www.ece.unm.edu/summa/notes/DSN/dsn8.pdf for 2.5 thou/mil thickness polythene film 2.5 thou = 0.0635 mm so dividing by 6.35 for 0.01mm 2.7KV for pulse use 2.1KV for DC use is dielectric strength linearly scaleable? presumably a 50 percent factor of safety in capacitor use for localised compression etc. is the maximum voltage across the insulation double the voltage along one wire winding layer? ie one layer and the return on the other side |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Lucas K2F magneto coil rewind | Electronics Repair | |||
Tesla coil construction - WinderSecSpark.jpg (0/1) | Electronic Schematics | |||
Tesla coil construction - WinderSecSpark.jpg (0/1) | Electronic Schematics | |||
Tesla coil construction - WinderSecSpark.jpg (0/1) | Electronic Schematics | |||
Magneto Coil Rewinding | Electronics Repair |