Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Static Sound in Radio Volume Control

Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael


  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12,924
Default Static Sound in Radio Volume Control


Michael wrote:

Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?



A really good control cleaner, or all new pots.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.
  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 272
Default Static Sound in Radio Volume Control

"Michael" wrote in message
...
Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael




Yes, the easiest and most usual solution is to go to your local Radio Shack toy
and cell phone store and get a can of TV-Tuner/Control Cleaner & Lubricant
Catalog #: 64-4315
Open your clock radio so that you can get to the volume control. It will have
an open area next to the terminals that gives you access to the resistance
element and contact inside.Point the spray tube of your tuner cleaner and spray
about ONE (1) second of cleaner into the innards of the control. Exercise the
control through its full range four or five times.
Reassemble your radio. That should fix the scratchy noise.

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

Life is like a roll of toilet paper; the closer it gets to the end, the faster
it goes.


  #5   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 5,247
Default Static Sound in Radio Volume Control

Michael wrote in message
...
Over time, the volume controls of all my clock radios always develop a

loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael




Desolder the pot or sometimes enough access to to
do the following without desoldering
Mark with felt tip
the relative positions of the sub parts, bend out
the retaining flaps of the casing metal with a small
screwdriver.
Dismantle the pot down to the carbon track clean/degrease.
Where the track is not too bad , just worn in arcs.
Bend, out or in whichever shows most fresh track, the wiper
blade/blades to use a different
part of track. If the wiper support can be wedged
away from the track then bend the wiper to give more
contact force. If the rivets have slackened on the
paxolin then squash with an old pair of basic red/blue/yellow single
action crimp pliers. To get to the wiper rivet
grind down the the interfering bulges a bit between the
red and blue sections.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




  #6   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,383
Default Static Sound in Radio Volume Control

In message , N_Cook
writes
Michael wrote in message
...
Over time, the volume controls of all my clock radios always develop a

loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael




Desolder the pot or sometimes enough access to to
do the following without desoldering
Mark with felt tip
the relative positions of the sub parts, bend out
the retaining flaps of the casing metal with a small
screwdriver.
Dismantle the pot down to the carbon track clean/degrease.
Where the track is not too bad , just worn in arcs.
Bend, out or in whichever shows most fresh track, the wiper
blade/blades to use a different
part of track. If the wiper support can be wedged
away from the track then bend the wiper to give more
contact force. If the rivets have slackened on the
paxolin then squash with an old pair of basic red/blue/yellow single
action crimp pliers. To get to the wiper rivet
grind down the the interfering bulges a bit between the
red and blue sections.


All this for a clock radio???
--
Ian
  #7   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,833
Default Static Sound in Radio Volume Control

The OP says "all my clock radios". That's odd. I've never had /all/ the pots
in the equipment I've owned become scratchy.

Obviously, cleaning the pot should fix the problem. But I suspect the OP
lives in a dusty/dirty environment, or is a heavy smoker.


  #8   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3
Default Static Sound in Radio Volume Control

Thank you to all who responded.

Michael

"Michael" wrote in message
...
Over time, the volume controls of all my clock radios always develop a

loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael




  #9   Report Post  
Posted to sci.electronics.repair
z z is offline
external usenet poster
 
Posts: 707
Default Static Sound in Radio Volume Control

On Dec 24, 7:53*pm, "Michael" wrote:
Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael


beside control cleaner, basically, it's a good idea to turn every
control through the whole range of movement and switch every switch
on and off on every piece of equipment you own that doesn't have the
newfangled rubber key type things, every week or two. keeps them from
getting spotty contact with dust, gunk from the air, particles from
wear, etc. over the years, wipers on pots, switches, relays, etc. have
evolved to do this pretty well.

given that clock radios don't have the volume adjusted a large amount,
they don't get this treatment the way older type equipment where the
volume was turned down to zero to switch the thing off did.

the other thing that happens, however, is that there gets to be extra
wear in the small area of a control which is actually used and as a
result contact is spotty; no cure for that.
  #10   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Thu, 25 Dec 2008 11:27:39 -0000, William Sommerwerck wrote:

The OP says "all my clock radios". That's odd. I've never had /all/ the pots
in the equipment I've owned become scratchy.

Obviously, cleaning the pot should fix the problem. But I suspect the OP
lives in a dusty/dirty environment, or is a heavy smoker.


No, it happens to mine too. Clock radios are usually made VERY cheaply.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Do infants have as much fun in their infancy as adults do in adultery?


  #11   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Thu, 25 Dec 2008 04:46:41 -0000, DaveM wrote:

"Michael" wrote in message
...
Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael




Yes, the easiest and most usual solution is to go to your local Radio Shack toy
and cell phone store and get a can of TV-Tuner/Control Cleaner & Lubricant
Catalog #: 64-4315
Open your clock radio so that you can get to the volume control. It will have
an open area next to the terminals that gives you access to the resistance
element and contact inside.Point the spray tube of your tuner cleaner and spray
about ONE (1)


Why do poeple write ONE (1)? Is this because some people can't read numerals?

second of cleaner into the innards of the control. Exercise the
control through its full range four or five times.
Reassemble your radio. That should fix the scratchy noise.




--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

This space was empty.
  #12   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 200
Default Static Sound in Radio Volume Control

Why do poeple write ONE (1)? *Is this because some people can't read
numerals?


It is to emphatize that it must be done in one second. Otherwise it
might go unnoticed.
  #13   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 200
Default Static Sound in Radio Volume Control

On 25 Des 2008, 01:53, Michael wrote:
Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael


Quick and cheap solution, keep adjusting the control up and down until
it stops scratching.
  #14   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 57
Default Static Sound in Radio Volume Control

Peter Hucker wrote:
On Thu, 25 Dec 2008 11:27:39 -0000, William Sommerwerck wrote:

The OP says "all my clock radios". That's odd. I've never had /all/ the pots
in the equipment I've owned become scratchy.

Obviously, cleaning the pot should fix the problem. But I suspect the OP
lives in a dusty/dirty environment, or is a heavy smoker.


No, it happens to mine too. Clock radios are usually made VERY cheaply.

Or it could be due to fine dust from your parrots' feathers and droppings.

--
Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED)
ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk
[at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL:
  #15   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,833
Default Static Sound in Radio Volume Control

"Peter Hucker" wrote in message
news
On Thu, 25 Dec 2008 11:27:39 -0000, William Sommerwerck

wrote:

The OP says "all my clock radios". That's odd. I've never had /all/ the
pots in the equipment I've owned become scratchy.
Obviously, cleaning the pot should fix the problem. But I suspect the
OP lives in a dusty/dirty environment, or is a heavy smoker.


No, it happens to mine too. Clock radios are usually made VERY cheaply.


That must be the problem. I don't own cheap clock-radios.




  #16   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 613
Default Static Sound in Radio Volume Control

On Fri, 2 Jan 2009 15:13:21 -0800, "William Sommerwerck"
wrote:

"Peter Hucker" wrote in message
news
On Thu, 25 Dec 2008 11:27:39 -0000, William Sommerwerck

wrote:

The OP says "all my clock radios". That's odd. I've never had /all/ the
pots in the equipment I've owned become scratchy.
Obviously, cleaning the pot should fix the problem. But I suspect the
OP lives in a dusty/dirty environment, or is a heavy smoker.


No, it happens to mine too. Clock radios are usually made VERY cheaply.


That must be the problem. I don't own cheap clock-radios.


It must be another of that PHucker's many problems. I have a few
cheap ones around and there are no pot problems. Of course good ones
don't use crappy pots, so that is a better solution.
  #17   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Fri, 02 Jan 2009 20:51:10 -0000, IanM wrote:

Peter Hucker wrote:
On Thu, 25 Dec 2008 11:27:39 -0000, William Sommerwerck wrote:

The OP says "all my clock radios". That's odd. I've never had /all/ the pots
in the equipment I've owned become scratchy.

Obviously, cleaning the pot should fix the problem. But I suspect the OP
lives in a dusty/dirty environment, or is a heavy smoker.


No, it happens to mine too. Clock radios are usually made VERY cheaply.

Or it could be due to fine dust from your parrots' feathers and droppings.


They did this before I got parrots. They don't seem to be worse since I got them. Surprisingly, nothing has got upset (except my 2nd last projection TV, which told me to change the filter after every 2 hours of use (instead of every 100)). I've since changed the projector to one without a filter, and it's worked fine ever since.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

The sailor came home from a secret two year mission only to find his wife with a new born baby. Furious, he was determined to track down the father to extract revenge.
"Was it my friend Sam", he demanded.
"No !" his weeping wife replied.
"Was it my friend Jim then?" he asked.
"NO !!!" she said even more upset.
"Well which one of my no good friends did this then?" he asked.
"Don't you think I have any friends of my own?" she snapped.
  #18   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Fri, 02 Jan 2009 23:13:21 -0000, William Sommerwerck wrote:

"Peter Hucker" wrote in message
news
On Thu, 25 Dec 2008 11:27:39 -0000, William Sommerwerck

wrote:

The OP says "all my clock radios". That's odd. I've never had /all/ the
pots in the equipment I've owned become scratchy.
Obviously, cleaning the pot should fix the problem. But I suspect the
OP lives in a dusty/dirty environment, or is a heavy smoker.


No, it happens to mine too. Clock radios are usually made VERY cheaply.


That must be the problem. I don't own cheap clock-radios.


A clock radio doesn't strike me as an item one would spend a lot of money on.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Helpdesk: Click on the 'my computer' icon on the left of the screen.
Customer: Your left or my left?
  #19   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Fri, 02 Jan 2009 19:34:11 -0000, Jeroni Paul wrote:

Why do poeple write ONE (1)? *Is this because some people can't read
numerals?


It is to emphatize that it must be done in one second. Otherwise it
might go unnoticed.


Then why not say "one (and make sure it's one)" or "one, yes one,", or just "ONE" in capitals, or "**ONE**"

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

When you own Llamas... spit happens
  #20   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Fri, 02 Jan 2009 19:35:26 -0000, Jeroni Paul wrote:

On 25 Des 2008, 01:53, Michael wrote:
Over time, the volume controls of all my clock radios always develop a loud
static sound whenever I adjust the volume. Is there a remedy for this?
--
Thanks,
Michael


Quick and cheap solution, keep adjusting the control up and down until
it stops scratching.


I just leave the volume in one place all the time.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Mental Health Outsourcing -- I was depressed last night so I called Lifeline. I got a call centre in Pakistan. I told them I was suicidal. They got all excited and asked if I could drive a truck.


  #21   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,833
Default Static Sound in Radio Volume Control

That must be the problem. I don't own cheap clock-radios.

A clock radio doesn't strike me as an item one would spend
a lot of money on.


There have been some nice ones, especially from GE in the late 70s and early
80s. GE produced the first clock-radio with an electronic display (1972),
and the first with digital electronic tuning (1980). They were not cheap. I
have both.


  #22   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 3,833
Default Static Sound in Radio Volume Control

I just leave the volume in one place all the time.

That's virtually guaranteed to produce a noisy control.


  #23   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Sat, 03 Jan 2009 21:15:07 -0000, William Sommerwerck wrote:

That must be the problem. I don't own cheap clock-radios.


A clock radio doesn't strike me as an item one would spend
a lot of money on.


There have been some nice ones, especially from GE in the late 70s and early
80s. GE produced the first clock-radio with an electronic display (1972),
and the first with digital electronic tuning (1980). They were not cheap. I
have both.


It's a device to get me out of bed in the morning. I'm not awake enough to appreciate it really. I've got (both - as I fall asleep after one) mine on buzzer, as Terry Wogan et al really really annoy me and I end up throwing the clock radio across the room.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Birthdays are good for you. Statistics show that the people who have the most live the longest. (Rev. Larry Lorenzoni)
  #24   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 415
Default Static Sound in Radio Volume Control

On Sat, 03 Jan 2009 21:15:44 -0000, William Sommerwerck wrote:

I just leave the volume in one place all the time.


That's virtually guaranteed to produce a noisy control.


It's only noisy when you move it. If you NEVER move it, there is no problem.

--
http://www.petersparrots.com http://www.insanevideoclips.com http://www.petersphotos.com

Contrary to popular belief, the most dangerous animal is not the lion or the tiger. The most dangerous animal is a shark riding on an elephant, trampling and eating everything it sees.
  #25   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12,924
Default Static Sound in Radio Volume Control


Peter Hucker wrote:

On Sat, 03 Jan 2009 21:15:07 -0000, William Sommerwerck wrote:

That must be the problem. I don't own cheap clock-radios.


A clock radio doesn't strike me as an item one would spend
a lot of money on.


There have been some nice ones, especially from GE in the late 70s and early
80s. GE produced the first clock-radio with an electronic display (1972),
and the first with digital electronic tuning (1980). They were not cheap. I
have both.


It's a device to get me out of bed in the morning. I'm not awake enough to appreciate it really. I've got (both - as I fall asleep after one) mine on buzzer, as Terry Wogan et al really really annoy me and I end up throwing the clock radio across the room.



So you are not only stupid, but lazy AND violent. No surprise.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.


  #26   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 12,924
Default Static Sound in Radio Volume Control


Peter Hucker wrote:

On Sat, 03 Jan 2009 21:15:44 -0000, William Sommerwerck wrote:

I just leave the volume in one place all the time.


That's virtually guaranteed to produce a noisy control.


It's only noisy when you move it. If you NEVER move it, there is no problem.



Bull. If it stays in one place it becomes intermittent. More proof
that you are a just another ignorant troll.


--
http://improve-usenet.org/index.html

aioe.org, Goggle Groups, and Web TV users must request to be white
listed, or I will not see your messages.

If you have broadband, your ISP may have a NNTP news server included in
your account: http://www.usenettools.net/ISP.htm


There are two kinds of people on this earth:
The crazy, and the insane.
The first sign of insanity is denying that you're crazy.
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
radio static zirath Electronics Repair 5 September 30th 08 03:53 PM
Static caused by volume knob in speaker set [email protected] Electronics Repair 3 May 27th 07 03:31 PM
GFCI & radio static Jim Elbrecht Home Repair 2 January 1st 05 05:10 PM
Continued: Static on amp, not volume related Dean Electronics Repair 1 December 17th 04 05:51 PM
Static on amplifier, not volume related Dean Electronics Repair 4 December 16th 04 03:12 AM


All times are GMT +1. The time now is 11:27 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"