Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 26
Default 74HB139 - any info?

Does anybody know what 74HB139 is?

It might be SN74HB139, 54HB139 or something like this. 16 pin TSSOP, made by
Texas Instruments, marked as follows:

HB139
(TI Logo)97K
KDT6

I'm 100% sure it is good old 74xx139 but what the heck is "HB" ? Google
brings only a bunch of good chinese guys that have everything in stock,
whatever it's called, but not even a single piece of information...

It _IS_ "HB", not "HC". There are several of those and all are exactly the
same.

Any info on HB logic family?

---
************************************************** ****************
* [email protected] KOI8 Net The impossible we do immediately. *
* Las Vegas NV, USA Miracles require 24-hour notice. *
************************************************** ****************
** Posted from http://www.teranews.com **
  #2   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 1,569
Default 74HB139 - any info?

On Tue, 09 Dec 2008 01:03:53 -0500, Sergey Kubushin put
finger to keyboard and composed:

Does anybody know what 74HB139 is?

It might be SN74HB139, 54HB139 or something like this. 16 pin TSSOP, made by
Texas Instruments, marked as follows:

HB139
(TI Logo)97K
KDT6

I'm 100% sure it is good old 74xx139 but what the heck is "HB" ? Google
brings only a bunch of good chinese guys that have everything in stock,
whatever it's called, but not even a single piece of information...

It _IS_ "HB", not "HC". There are several of those and all are exactly the
same.

Any info on HB logic family?


SN54AHCT139, SN74AHCT139 Dual 2-line to 4-line
Decoders/Demultiplexers:
http://www.datasheetarchive.com/data...SA00144064.pdf

Page 2 of the datasheet has a list of top-side marking codes:

SSOP DB Tape and reel SN74AHCT139DBR HB139
TSSOP PW Tape and reel SN74AHCT139PWR HB139
TVSOP DGV Tape and reel SN74AHCT139DGVR HB139

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.
  #3   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 26
Default 74HB139 - any info?

Franc Zabkar wrote:
On Tue, 09 Dec 2008 01:03:53 -0500, Sergey Kubushin put
finger to keyboard and composed:

Does anybody know what 74HB139 is?

It might be SN74HB139, 54HB139 or something like this. 16 pin TSSOP, made by
Texas Instruments, marked as follows:

HB139
(TI Logo)97K
KDT6

I'm 100% sure it is good old 74xx139 but what the heck is "HB" ? Google
brings only a bunch of good chinese guys that have everything in stock,
whatever it's called, but not even a single piece of information...

It _IS_ "HB", not "HC". There are several of those and all are exactly the
same.

Any info on HB logic family?


SN54AHCT139, SN74AHCT139 Dual 2-line to 4-line
Decoders/Demultiplexers:
http://www.datasheetarchive.com/data...SA00144064.pdf

Page 2 of the datasheet has a list of top-side marking codes:

SSOP DB Tape and reel SN74AHCT139DBR HB139
TSSOP PW Tape and reel SN74AHCT139PWR HB139
TVSOP DGV Tape and reel SN74AHCT139DGVR HB139


Ah, I should've noticed!...

Thank you for the info.

---
************************************************** ****************
* [email protected] KOI8 Net The impossible we do immediately. *
* Las Vegas NV, USA Miracles require 24-hour notice. *
************************************************** ****************
** Posted from http://www.teranews.com **
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Thanks for All the Info [email protected] Home Repair 0 August 7th 07 02:42 AM
Anyone using CNC? I Need Info Joe AutoDrill Woodworking 0 September 7th 05 04:42 PM
WTD Info on Tapmatic 700X and info on Tapmatics Marty Escarcega Metalworking 3 June 8th 04 04:00 AM
INFO louis alleva Metalworking 3 November 6th 03 10:41 AM


All times are GMT +1. The time now is 11:40 AM.

Powered by vBulletin® Copyright ©2000 - 2023, Jelsoft Enterprises Ltd.
Copyright 2004-2023 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"