As found on Crate GLX65 combo of 2004, miniature pots with clear plastic
shaft and illuminator bulb inside the pot. Independent source that is.
For future reference, as in for mechanically broken switch, all the pots are
fine. Only 4 years of normal use and yet again flimsey push/push switches
are falling apart. Will replace those with robust conventional toggle
switches, enough room after bending the pins, and only SPST use although
they are DPDT switches.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

N_Cook wrote in message
...
As found on Crate GLX65 combo of 2004, miniature pots with clear plastic
shaft and illuminator bulb inside the pot. Independent source that is.
For future reference, as in for mechanically broken switch, all the pots
are
fine. Only 4 years of normal use and yet again flimsey push/push switches
are falling apart. Will replace those with robust conventional toggle
switches, enough room after bending the pins, and only SPST use although
they are DPDT switches.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




I can't find any reference to them.
Like these in general form
http://www.germes-online.com/direct/...tentiometer.jp
g
body 10x10x5 mm and even then space inside for a wire-ended bulb. The
spindle made of clear plastic to conduct the light into a knob with red
plastic inserts.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/