DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Stereo help needed - NAD receiver (https://www.diybanter.com/electronics-repair/263079-stereo-help-needed-nad-receiver.html)

Pauli G October 20th 08 06:18 PM

Stereo help needed - NAD receiver
 
I dug out an old NAD reciever along with Advent Prodigy mini-tower
speakers from the mess in the basement. I hooked this forgotten gem
up to have some music in my workshop, but for some reason I'm getting
nothing out of the speakers. When I touch the metal half-loops
("pre-out/main in" on the back of the receiver) I do get a low-tone
growl
out of the speakers, but that's it. I do get AM/FM reception in the
basement becuase the reciever is locking on to stations. Just
wondering if the reciever is fried because it's been sitting un-used
for a good 12 years until I plugged it in yesterday.

I found a photo/description of the NAD model that I'm trying to fix.
I think this is exactly like mine, and it shows a photo of the loops
that I touch to give the growling sound:


http://chicago.craigslist.org/nwc/ele/877154732.html

N_Cook October 20th 08 06:30 PM

Stereo help needed - NAD receiver
 
Pauli G wrote in message
...
I dug out an old NAD reciever along with Advent Prodigy mini-tower
speakers from the mess in the basement. I hooked this forgotten gem
up to have some music in my workshop, but for some reason I'm getting
nothing out of the speakers. When I touch the metal half-loops
("pre-out/main in" on the back of the receiver) I do get a low-tone
growl
out of the speakers, but that's it. I do get AM/FM reception in the
basement becuase the reciever is locking on to stations. Just
wondering if the reciever is fried because it's been sitting un-used
for a good 12 years until I plugged it in yesterday.

I found a photo/description of the NAD model that I'm trying to fix.
I think this is exactly like mine, and it shows a photo of the loops
that I touch to give the growling sound:


http://chicago.craigslist.org/nwc/ele/877154732.html



monitor switch setting ?

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




[email protected] October 20th 08 07:32 PM

Stereo help needed - NAD receiver
 
On Oct 20, 1:18*pm, Pauli G wrote:
I dug out an old NAD reciever along with Advent Prodigy mini-tower
speakers from the mess in the basement. *I hooked this forgotten gem
up to have some music in my workshop, but for some reason I'm getting
nothing out of the speakers. * When I touch the metal half-loops
("pre-out/main in" on the back of the receiver) I do get a low-tone
growl
out of the speakers, but that's it. *I do get AM/FM reception in the
basement becuase the reciever is locking on to stations. *Just
wondering if the reciever is fried because it's been sitting un-used
for a good 12 years until I plugged it in yesterday.

I found a photo/description of the NAD model that I'm trying to fix.
I think this is exactly like mine, and it shows a photo of the loops
that I touch to give the growling sound:

http://chicago.craigslist.org/nwc/ele/877154732.html


If you are getting hum from the pre-amp to amp connections when you
touch them that suggests the amp section is ok. Bad connection on a
selector switch or tape monitor switch maybe. Try exercising the
switches some. Plug a rca cable into some of the other source jacks,
touch the center post of the other end and see if you can get hum on
any other input. Or hook a cd player up to it.

Arfa Daily October 21st 08 09:45 AM

Stereo help needed - NAD receiver
 

"N_Cook" wrote in message
...
Pauli G wrote in message
...
I dug out an old NAD reciever along with Advent Prodigy mini-tower
speakers from the mess in the basement. I hooked this forgotten gem
up to have some music in my workshop, but for some reason I'm getting
nothing out of the speakers. When I touch the metal half-loops
("pre-out/main in" on the back of the receiver) I do get a low-tone
growl
out of the speakers, but that's it. I do get AM/FM reception in the
basement becuase the reciever is locking on to stations. Just
wondering if the reciever is fried because it's been sitting un-used
for a good 12 years until I plugged it in yesterday.

I found a photo/description of the NAD model that I'm trying to fix.
I think this is exactly like mine, and it shows a photo of the loops
that I touch to give the growling sound:


http://chicago.craigslist.org/nwc/ele/877154732.html



monitor switch setting ?

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




First place I'd be looking also. Tape monitor / direct switch, or speaker
select switches, or if none of these, work a jack in and out of the
headphone socket a few times, just in case there is any switch attached,
which has developed oxidised contacts from it standing unused.

Arfa



jakdedert October 21st 08 01:57 PM

Stereo help needed - NAD receiver
 
Arfa Daily wrote:
"N_Cook" wrote in message
...
Pauli G wrote in message
...
I dug out an old NAD reciever along with Advent Prodigy mini-tower
speakers from the mess in the basement. I hooked this forgotten gem
up to have some music in my workshop, but for some reason I'm getting
nothing out of the speakers. When I touch the metal half-loops
("pre-out/main in" on the back of the receiver) I do get a low-tone
growl
out of the speakers, but that's it. I do get AM/FM reception in the
basement becuase the reciever is locking on to stations. Just
wondering if the reciever is fried because it's been sitting un-used
for a good 12 years until I plugged it in yesterday.

I found a photo/description of the NAD model that I'm trying to fix.
I think this is exactly like mine, and it shows a photo of the loops
that I touch to give the growling sound:


http://chicago.craigslist.org/nwc/ele/877154732.html


monitor switch setting ?

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




First place I'd be looking also. Tape monitor / direct switch, or speaker
select switches, or if none of these, work a jack in and out of the
headphone socket a few times, just in case there is any switch attached,
which has developed oxidised contacts from it standing unused.

Arfa


Good advice...and while the OP is exercising the headphone jack, it
would be good to check for signal there as well. Use, uh, say
headphones.... g

jak


All times are GMT +1. The time now is 12:46 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter