rpm of a cordless drill motor?
What might be the typical rpm of a cordless drill motor? Or what is the typical gear ratio? Some single speed spin up to about 700 rpm at the chuck. Dual speed usually go up to about 400 and 1400 rpm at the chuck. Thanks. |
rpm of a cordless drill motor?
I am calculating it at somewhere around 9000 rpm, but I'm hoping that's not true. |
rpm of a cordless drill motor?
"John Doe" wrote in message ... I am calculating it at somewhere around 9000 rpm, but I'm hoping that's not true. It's likely to be something like that, at least three or four thousand RPM unloaded. All hand held drills are geared down between 5:1 and 10:1, some even more. |
rpm of a cordless drill motor?
John Doe wrote:
What might be the typical rpm of a cordless drill motor? Or what is the typical gear ratio? Some single speed spin up to about 700 rpm at the chuck. Dual speed usually go up to about 400 and 1400 rpm at the chuck. Thanks. I think you'll find it to be more like no more than 400 on torque mode and maybe 900 or so on speed mode at the chuck.. http://webpages.charter.net/jamie_5" |
All times are GMT +1. The time now is 07:28 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter