Scope scale illuminator bulbs
 

Scale illumination lamps blown. Anyone ever tried droppered blue or white
LEDs for such purposes. Would probably require a reflector on the LED
lighting axis to throw light off radially.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

Scope scale illuminator bulbs
 

In article , says...
Scale illumination lamps blown. Anyone ever tried droppered blue or white
LEDs for such purposes. Would probably require a reflector on the LED
lighting axis to throw light off radially.


--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




Or you could use SMD type that give light of the top. They would be
small enough to fit the right way round in the space used by a #67 bulb
commonly used for the grid illumination.

- Tim -

Scope scale illuminator bulbs
 

In article ,
N Cook wrote:
Scale illumination lamps blown. Anyone ever tried droppered blue or white
LEDs for such purposes. Would probably require a reflector on the LED
lighting axis to throw light off radially.

Yes - but you have both the colour problem (nasty hues) and the fact they
tend to be a near point source as opposed to the tubular tungsten ones
normally used.
I got fed up of constantly replacing those on a series of PPMs and fitted
small fluorescents. Of course this wouldn't be practical on most domestic
meters.

--
*If you must choose between two evils, pick the one you've never tried before

Dave Plowman London SW
To e-mail, change noise into sound.

Scope scale illuminator bulbs
 

In article , "N Cook" wrote:
Scale illumination lamps blown. Anyone ever tried droppered blue or white
LEDs for such purposes. Would probably require a reflector on the LED
lighting axis to throw light off radially.



How about red or orange or green, yellow ?

Scope scale illuminator bulbs
 

"N Cook" wrote in message
...
Scale illumination lamps blown. Anyone ever tried droppered blue or white
LEDs for such purposes. Would probably require a reflector on the LED
lighting axis to throw light off radially.

An idea from IRLEDs which are available with wide angle radiation pattern -
and have virtually flat lens instead of domed, you could flatten the end of
some white LEDs (taking care not to cut too deep and take out the bond
wire!) using a medium rough emery paper will leave a diffuser lens end.