Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
part id
I am trying to track down some inverter driver chips. Not sure if there fets or transistors. They are in 8 pin flat packs SM 4410 bf l28ca 4425 af l28c pins 1,2,3 hooked together pin 4 seems to switch/gate input pin 5,6,7,8 hooked together. there labeled as Q numbers on the silk screen, bu that does not mean there not fets. any ideas? bob |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
2 Part Epoxy vs. One Part for Garage floor? | Home Repair | |||
Specs that are part English and part metric | Metalworking | |||
Part 1, Part 2 brass, Torbeck or Siamp? | UK diy | |||
New Boiler = Room Stat = Part 'P' & Part 'L' question (long) | UK diy | |||
Sourcing a Part L compliant part glazed stable door | UK diy |