DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Power supply (https://www.diybanter.com/electronics-repair/251734-power-supply.html)

Marcel May 30th 08 06:12 PM

Power supply
 
Hi,

We bought a Creative ZEN V mp3 player. It comes with a USB-cable to
charge the li-ion battery through a pc. I want to charge this player
with a power supply (220V in). I think the ZEN needs 5 V at 2.4A (max)
it says at the internet. I do have already a power supply witch says:
input 100-240V-50/60Hz 120mA, output 5V === 400mA. Is this save to
use??? Will it work?

Thanks for helping

Marcel

Franc Zabkar May 30th 08 09:44 PM

Power supply
 
On Fri, 30 May 2008 10:12:01 -0700 (PDT), Marcel
put finger to keyboard and composed:

Hi,

We bought a Creative ZEN V mp3 player. It comes with a USB-cable to
charge the li-ion battery through a pc. I want to charge this player
with a power supply (220V in). I think the ZEN needs 5 V at 2.4A (max)
it says at the internet.


That would be the MP3 player's maximum charging/operating current when
connected to an AC adapter.

I do have already a power supply witch says:
input 100-240V-50/60Hz 120mA, output 5V === 400mA. Is this save to
use??? Will it work?

Thanks for helping

Marcel


A USB port can only supply a maximum of 500mA. That would be the MP3
player's maximum charging current when connected to a PC.

Creative's web site claims that the adapter can "charge your ZEN in
less than half the time of USB charging". This begs the question, does
the MP3 player need to detect when it is connected to a USB host in
order to limit its current demand? Would this mean that a dumb 500mA
adapter would be overloaded?

ZEN Power Adapter:
http://us.creative.com/products/prod...?product=15050

- Franc Zabkar
--
Please remove one 'i' from my address when replying by email.

JANA June 1st 08 05:55 AM

Power supply
 
From what you are indicating, your power supply is under sized. The
voltage is correct, but there is another very important issue. If your
unit is asking for a supply of 2.4 Amps, and your supply is able to only
put out 400 ma, there will be a problem. Your supply will not last very
long.

When your unit is in a USB port, it probably can sense that and the
limitations are regarded. When you connect the external supply, it will
expect a very different spec.

--

JANA
_____


"Marcel" wrote in message
...
Hi,

We bought a Creative ZEN V mp3 player. It comes with a USB-cable to
charge the li-ion battery through a pc. I want to charge this player
with a power supply (220V in). I think the ZEN needs 5 V at 2.4A (max)
it says at the internet. I do have already a power supply witch says:
input 100-240V-50/60Hz 120mA, output 5V === 400mA. Is this save to
use??? Will it work?

Thanks for helping

Marcel




All times are GMT +1. The time now is 11:48 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter