Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
52" RCA CTC178 Pincushion trouble.
M # P52755BA Ch # CTC178L2B, pix not quite wide enough, & slightly
keystoned, found a bad connection @ CR401 in pincushion circuit, replaced it, found Q801 leaky (IRF730), put an IRF630 in place of it, now the pix is waaay too narrow on width, with more keystone. R801 is burnt, & don't know the value. C407 is ok (0.94 uf @ 250 volt.), Anyone have a schematic for this unit? Or have any repair tips? Thanks, Dani. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CTC178 Service Menu Parameters | Electronics Repair | |||
Orange Peel Texture? "Knockdown" or "Skip Trowel" also "California Knock-down" | Home Repair | |||
JVC 32" tuner trouble. | Electronics Repair | |||
Does anyone make a trouble free trouble light? | Home Repair | |||
R.C.A. Pincushion | Electronics Repair |