 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
RCA 27" Tv, odd problem.
Model # 27R410T Chassis ITC008FAM. Was repaired for going off
horizontal months ago. Now, sometimes it works ok, other times it won't start, just shuts right down, with no high voltage. When it's running, all the SMPS secondaries roam around a bit, but settle down if the G 2 is set "just right" Then it works fine. Are the flybacks so crappy, that it can make the set unusable, if set wrong or "drift" slightly? Dani. |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
RCA 27" Tv, odd problem.
Especially if an aftermarket LOPT has been installed when the original
failed. "Meat Plow" wrote in message ... On Wed, 10 Oct 2007 15:51:18 -0700, Dani wrote: Model # 27R410T Chassis ITC008FAM. Was repaired for going off horizontal months ago. Now, sometimes it works ok, other times it won't start, just shuts right down, with no high voltage. When it's running, all the SMPS secondaries roam around a bit, but settle down if the G 2 is set "just right" Then it works fine. Are the flybacks so crappy, that it can make the set unusable, if set wrong or "drift" slightly? Dani. Sounds like a reasonable assumption. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Ceramic floor tiles "crunching"; foundation problem? | Home Ownership | |||
| Eden "The Metro" Bass Amp intermittent problem | Electronics Repair | |||
| UPDATE: "Problem with Canon Pixma ip4000 printer" | Electronics Repair | |||
| Update to ""Flood" Problem in Refrigerator" | Home Repair | |||
| Update to ""Flood" Problem in Refrigerator" | Home Ownership | |||
Linear Mode
