Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Color TV issue
I have a 19" Admiral Colored TV which is probably 15 years old or so -
played flawlessly until now. Just in the past couple days - the screen started jumping. The symptoms a 1. Non existent sometimes 2. Intermittent at times 3. Really nasty at others. I've not done "TV" repairs for many years - like very early 90s (regularly) then one here and there over the years - so I'm a bit out of the "TV" loop. I've devoted my bench time and equipment to other fields, I'm a bit out of the loop on TV issues. Personally, I'm thinking the faults are in the priority as shown. 1. Cold solder joint 2. A cap/resistor going bad 3. Semiconductor going flakey I have to look and see if I have any spray to use to check for "heat"issues. Haven't had much call for it in recent years. The TV will play fine for a while - then jump like a bad antenna connection. OR it will display a solid while horizontal line with the picture "trying" to lock in - video flitters about above and below the white line. Turn the set off - then back on - it is fine for a second - then back to white line and flittering. "Sometimes" but not always - it "seems" to respond to pounding on the set - but that could be misleading. I fell asleep "listening" to it last night - woke up this AM - it was playing like nothing wrong. Has been all day - so far. I don't have the model number available at this second, but can get it - hopefully someone has a schematic. I'm going to be taking it apart in the next day or two - to take a look at it. Have a couple more important issues pending right now. Any opinions? Yeah, I know all about the HDTV issues, I just want to keep this one alive a while longer. Besides, I've seen some TVs bought new (recently) - not lasting a year. I'll use this until it dies. Maybe if this would be kind enough to continue a while longer, get a converter box "supposedly" coming out for the HDTV to Analog - sets There's not a thing wrong with this set when it is displaying the picture normally. FWIW - this set "is" used - heavily. Best sleeping pill I ever had. Aside from watching it through the day - or "listening" to it as doing other work - games and so on, there is the falling asleep to it. So, it gets lots of use. Thanks in advance for your opinions. Lou |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Color TV issue
On Oct 9, 5:52 pm, "radiosrfun" wrote:
I have a 19" Admiral Colored TV which is probably 15 years old or so - played flawlessly until now. Just in the past couple days - the screen started jumping. The symptoms a 1. Non existent sometimes 2. Intermittent at times 3. Really nasty at others. I've not done "TV" repairs for many years - like very early 90s (regularly) then one here and there over the years - so I'm a bit out of the "TV" loop. I've devoted my bench time and equipment to other fields, I'm a bit out of the loop on TV issues. Personally, I'm thinking the faults are in the priority as shown. 1. Cold solder joint 2. A cap/resistor going bad 3. Semiconductor going flakey I have to look and see if I have any spray to use to check for "heat"issues. Haven't had much call for it in recent years. The TV will play fine for a while - then jump like a bad antenna connection. OR it will display a solid while horizontal line with the picture "trying" to lock in - video flitters about above and below the white line. Turn the set off - then back on - it is fine for a second - then back to white line and flittering. "Sometimes" but not always - it "seems" to respond to pounding on the set - but that could be misleading. I fell asleep "listening" to it last night - woke up this AM - it was playing like nothing wrong. Has been all day - so far. I don't have the model number available at this second, but can get it - hopefully someone has a schematic. I'm going to be taking it apart in the next day or two - to take a look at it. Have a couple more important issues pending right now. Any opinions? Yeah, I know all about the HDTV issues, I just want to keep this one alive a while longer. Besides, I've seen some TVs bought new (recently) - not lasting a year. I'll use this until it dies. Maybe if this would be kind enough to continue a while longer, get a converter box "supposedly" coming out for the HDTV to Analog - sets There's not a thing wrong with this set when it is displaying the picture normally. FWIW - this set "is" used - heavily. Best sleeping pill I ever had. Aside from watching it through the day - or "listening" to it as doing other work - games and so on, there is the falling asleep to it. So, it gets lots of use. Thanks in advance for your opinions. Lou how many times did you use the word 'issues' in that post ?! ;-) in cases like that we'd say 'problems' in England! start by resoldering: the vertical /frame chip, line out transformer area, the tuner pins, large resistors etc . your problem is quite common with a set that age and hours' use. should be fixable (assuming you can solder and are aware of the dangers of this work) so don't give up! good luck. -B |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Color TV issue
"b" wrote in message
ps.com... On Oct 9, 5:52 pm, "radiosrfun" wrote: I have a 19" Admiral Colored TV which is probably 15 years old or so - played flawlessly until now. Just in the past couple days - the screen started jumping. The symptoms a 1. Non existent sometimes 2. Intermittent at times 3. Really nasty at others. I've not done "TV" repairs for many years - like very early 90s (regularly) then one here and there over the years - so I'm a bit out of the "TV" loop. I've devoted my bench time and equipment to other fields, I'm a bit out of the loop on TV issues. Personally, I'm thinking the faults are in the priority as shown. 1. Cold solder joint 2. A cap/resistor going bad 3. Semiconductor going flakey I have to look and see if I have any spray to use to check for "heat"issues. Haven't had much call for it in recent years. The TV will play fine for a while - then jump like a bad antenna connection. OR it will display a solid while horizontal line with the picture "trying" to lock in - video flitters about above and below the white line. Turn the set off - then back on - it is fine for a second - then back to white line and flittering. "Sometimes" but not always - it "seems" to respond to pounding on the set - but that could be misleading. I fell asleep "listening" to it last night - woke up this AM - it was playing like nothing wrong. Has been all day - so far. I don't have the model number available at this second, but can get it - hopefully someone has a schematic. I'm going to be taking it apart in the next day or two - to take a look at it. Have a couple more important issues pending right now. Any opinions? Yeah, I know all about the HDTV issues, I just want to keep this one alive a while longer. Besides, I've seen some TVs bought new (recently) - not lasting a year. I'll use this until it dies. Maybe if this would be kind enough to continue a while longer, get a converter box "supposedly" coming out for the HDTV to Analog - sets There's not a thing wrong with this set when it is displaying the picture normally. FWIW - this set "is" used - heavily. Best sleeping pill I ever had. Aside from watching it through the day - or "listening" to it as doing other work - games and so on, there is the falling asleep to it. So, it gets lots of use. Thanks in advance for your opinions. Lou how many times did you use the word 'issues' in that post ?! ;-) in cases like that we'd say 'problems' in England! start by resoldering: the vertical /frame chip, line out transformer area, the tuner pins, large resistors etc . your problem is quite common with a set that age and hours' use. should be fixable (assuming you can solder and are aware of the dangers of this work) so don't give up! good luck. -B Issues - problems = same thing. Solder? If you had read my post - you would have seen I said I "used" to do TV repairs - but do other fields of Electronics work - now. Yeah, I think I can solder! At least I don't use "plumbers" solder like I've seen come across my bench in some sets I service! Thanks for the assist. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
F/S: Tektronix 500MHz Scope color phosphor color Digital TDS3052 | Electronics Repair | |||
Moss Green Color On House: Will Cold Temp's Kill It, And The Color ? | Home Repair | |||
Viewsonic A90f color issue | Electronics Repair | |||
Color match... making cherry the same color as fumed white oak. | Woodworking | |||
Zenith 25" color TV SM2568S CRT board color adjustments | Electronics Repair |