Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
cross hairs won't become white
My VS-4504R Mitsubishi won't move the red bar down unto the white
horizontal to make a nice white. The verical is okay. Is there an adjustment on the circuit board or does the gun have adjustments? thanks Ed |
#2
Posted to sci.electronics.repair
|
|||
|
|||
cross hairs won't become white
Most likely the focus yokes have become magnetized unevenly. This can
be corrected with the centering magnets, but this will require a readjustment of the beam shapers if your CRTs are still strong enough to benefit from it. If not, there are ways. JURB |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Help needed with identifying cause for dirty white illumination in LCD monitors. Looks yellowish / off white! | Electronics Repair | |||
Nancy Loves George: The Elites-Driven 'White Trashing of America' to Degrade, Demoralize & Replace White America | Home Repair | |||
CROSS CUT SAW | Woodworking | |||
White is more purple than white on projection tv | Electronics Repair | |||
Cross ref "?" | Electronics Repair |