DIYbanter - Looking for TRIAD R-11A transformer

DIYbanter (https://www.diybanter.com/)

- Electronics Repair (https://www.diybanter.com/electronics-repair/)

- - Looking for TRIAD R-11A transformer (https://www.diybanter.com/electronics-repair/213881-looking-triad-r-11a-transformer.html)

[email protected]

September 9th 07 11:35 PM

Looking for TRIAD R-11A transformer

Greetings!
I am looking for a TRIAD R-11A power transformer in good condition,
for a GATES compressor repair.
prim: 115V sec: 700Vct-90mA, 6,3Vct-3.5A, 5V-3A
It would really help me out if anybody knows how to get one..;-)
Peter Riebeek
Studio 150
Lauriergracht 150
1016RV Amsterdam
the Netherlands

DaveM

September 10th 07 12:16 AM

Looking for TRIAD R-11A transformer

wrote in message
s.com...
Greetings!
I am looking for a TRIAD R-11A power transformer in good condition,
for a GATES compressor repair.
prim: 115V sec: 700Vct-90mA, 6,3Vct-3.5A, 5V-3A
It would really help me out if anybody knows how to get one..;-)
Peter Riebeek
Studio 150
Lauriergracht 150
1016RV Amsterdam
the Netherlands

Not an exact match, but have a look he
http://www.tubesandmore.com/
at items P-T273DX, P-T273DZ and P-T273BX. If the low voltage secondaries are
important, you might have to get a couple transformers to boost the current a
bit.

--
Dave M
MasonDG44 at comcast dot net (Just substitute the appropriate characters in the
address)

"In theory, there isn't any difference between theory and practice. In
practice, there is." - Yogi Berra

msg	September 10th 07 01:59 AM

Looking for TRIAD R-11A transformer

wrote:

Greetings!
I am looking for a TRIAD R-11A power transformer in good condition,
for a GATES compressor repair.
prim: 115V sec: 700Vct-90mA, 6,3Vct-3.5A, 5V-3A
It would really help me out if anybody knows how to get one..;-)

Consider rewinding the transformer; I have used the services
of a nearby rewinder (in the U.S.) when it is impossible to
obtain a replacement transformer. In my case, I disassemble
the old one, note the wire gauge and details of each winding,
and count turns while unwinding (you may also slice the windings
carefully off of the cores and count turns and layers in the
slices) and provide this data together with the laminations
and structural parts to the rewinding house. Their rates have
been surprisingly affordable.

Regards,

Michael

All times are GMT +1. The time now is 08:43 AM.