any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

"Selkirk" wrote in message
ups.com...
anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.


You could draw one up pretty easily, there's only about 10 electrical
components in the typical microwave. Even the service manual won't have a
schematic for the electronic control board if that's what you're after
though.

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

"James Sweet" wrote in
news:vLuti.4723$I64.4038@trndny08:


"Selkirk" wrote in message
ups.com...
anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.


You could draw one up pretty easily, there's only about 10 electrical
components in the typical microwave. Even the service manual won't
have a schematic for the electronic control board if that's what
you're after though.




The schematic was on the inside of the case on my Sharp MW.
You're correct about no schematic for the control PCB.

--
Jim Yanik
jyanik
at
kua.net

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

On Aug 5, 9:57?pm, Jim Yanik wrote:
"James Sweet" wrote innews:vLuti.4723$I64.4038@trndny08:



"Selkirk" wrote in message
oups.com...
anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.

You could draw one up pretty easily, there's only about 10 electrical
components in the typical microwave. Even the service manual won't
have a schematic for the electronic control board if that's what
you're after though.

The schematic was on the inside of the case on my Sharp MW.
You're correct about no schematic for the control PCB.

--
Jim Yanik
jyanik
at
kua.net

The power supply,magnetron, and door switches are all quite simple.
Easy to diagnose (imho). Hard to believe that somehwere there isn't a
schematic for the display/control board. And I find it harder to
believe that the manufacturer of the SMD transistors would take the
time to print a number on them and it not be cross referenceable. I've
found cross for the good transistors, but the bad one illudes me.
Guess it rerally is a throw away item.

any 1 know where to get a free sharp microwave schematic? (modelR310fw) Thanks.
 

Selkirk wrote:
On Aug 5, 9:57?pm, Jim Yanik wrote:
"James Sweet" wrote innews:vLuti.4723$I64.4038@trndny08:



"Selkirk" wrote in message
ups.com...
anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.
You could draw one up pretty easily, there's only about 10 electrical
components in the typical microwave. Even the service manual won't
have a schematic for the electronic control board if that's what
you're after though.
The schematic was on the inside of the case on my Sharp MW.
You're correct about no schematic for the control PCB.

--
Jim Yanik
jyanik
at
kua.net

The power supply,magnetron, and door switches are all quite simple.
Easy to diagnose (imho). Hard to believe that somehwere there isn't a
schematic for the display/control board. And I find it harder to
believe that the manufacturer of the SMD transistors would take the
time to print a number on them and it not be cross referenceable. I've
found cross for the good transistors, but the bad one illudes me.
Guess it rerally is a throw away item.


If you are in the UK, you can get timer panels repaired at QER
http://www.qer.biz/servReps.htm

Ron(UK)

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

The power supply,magnetron, and door switches are all quite simple.
Easy to diagnose (imho). Hard to believe that somehwere there isn't a
schematic for the display/control board. And I find it harder to
believe that the manufacturer of the SMD transistors would take the
time to print a number on them and it not be cross referenceable. I've
found cross for the good transistors, but the bad one illudes me.
Guess it rerally is a throw away item.


A schematic exists for the control board, but it will be an internal asset
to the company that designed the board. Many thransistors in this sort of
thing are house numbered for internal identification. What is wrong woth the
unit? You should be able to test components and diagnose the board without a
schematic. It's very rare for me to have one for anything I fix.

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

On Aug 6, 10:33?am, "James Sweet" wrote:
The power supply,magnetron, and door switches are all quite simple.
Easy to diagnose (imho). Hard to believe that somehwere there isn't a
schematic for the display/control board. And I find it harder to
believe that the manufacturer of the SMD transistors would take the
time to print a number on them and it not be cross referenceable. I've
found cross for the good transistors, but the bad one illudes me.
Guess it rerally is a throw away item.

A schematic exists for the control board, but it will be an internal asset
to the company that designed the board. Many thransistors in this sort of
thing are house numbered for internal identification. What is wrong woth the
unit? You should be able to test components and diagnose the board without a
schematic. It's very rare for me to have one for anything I fix.

The unit is question is the display board. The other functions
(anunciator, key press, control) all work. Only the display is non-
functional (as far as I can tell).
The offending part was smoked. I pieced the parts back together to get
what i believe is the correct number. That's why I'm unable to tell if
it's a PQ40 or PO40 and the "4" is a guess as well. Most of the
body(SMD part) was held in place by silocone gell applied for other
reasons.
My next attempt will to be to try either an NPN or PNP (through hole
part) in it's place and see what happens. 3 pins, nine possible
combos, 2 types, should only take an hour or so.. That's assuming it's
not a vreg, vref, fet, or duel diode..... Sure mis sam's
photofacts :))

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

On 6 ago, 01:33, Selkirk wrote:
anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.

www.eserviceinfo.com ?

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

The unit is question is the display board. The other functions
(anunciator, key press, control) all work. Only the display is non-
functional (as far as I can tell).
The offending part was smoked. I pieced the parts back together to get
what i believe is the correct number. That's why I'm unable to tell if
it's a PQ40 or PO40 and the "4" is a guess as well. Most of the
body(SMD part) was held in place by silocone gell applied for other
reasons.
My next attempt will to be to try either an NPN or PNP (through hole
part) in it's place and see what happens. 3 pins, nine possible
combos, 2 types, should only take an hour or so.. That's assuming it's
not a vreg, vref, fet, or duel diode..... Sure mis sam's
photofacts :))


Trace the circuit, there should be a resistor in line to the base, the
emitter will usually be grounded if NPN, or connected to V+ if PNP. A little
detective work is often all it takes.

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

On Aug 6, 6:14?pm, b wrote:
On 6 ago, 01:33, Selkirk wrote:

anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.

www.eserviceinfo.com?

Thanks for the link. Checked them out and they did not have the info i
was looking for.

any 1 know where to get a free sharp microwave schematic? (model R310fw) Thanks.
 

"Selkirk" wrote in message
oups.com...
On Aug 6, 6:14?pm, b wrote:
On 6 ago, 01:33, Selkirk wrote:

anyone know where I can get or down load a free sharp microwave
schematic? (model R310fw) Thanks.

www.eserviceinfo.com?

Thanks for the link. Checked them out and they did not have the info i
was looking for.


Those sites that spam rarely do.