Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Belton springline reverb
Guitar pickup type, not piezo
Owner never realised his reverb was broken as 2 of the 3 springs remained connected. So I will leave as is but with the loose one removed. So I didn't take it apart to replace. Anyone familiar with the anchor points, I'm just curious? They look like small soft iron rods somehow soldered to plastic surrounds - so I left alone. It was the 2mm or so diameter iron that had snapped about where it passes through the laminated iron surround of the pickup. -- Diverse Devices, Southampton, England electronic hints and repair briefs , schematics/manuals list on http://home.graffiti.net/diverse:graffiti.net/ |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Seeknig schematic or service manual for MICMIX 305XL Studio Reverb unit | Electronics Repair |