DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   1981 Delco radio repair (https://www.diybanter.com/electronics-repair/201639-re-1981-delco-radio-repair.html)

billccm May 23rd 07 04:28 PM

1981 Delco radio repair
 
On May 23, 7:57 am, Gary Tait wrote:
billccm wrote in news:1179887619.073718.77600
@w5g2000hsg.googlegroups.com:





Hello:
A Delco radio from a 1981 Corvette came across my work bench. It must
be the top of the line for it's time; it is electronic tuned, and auto
reverse cassette. Unfortunately, all the stickers for model and serial
numbers have fallen off the radio's case.
The complaint is hiss, but no tuning, no display, no music.
I applied 12Vdc, and the complaint is correct. The display is dark,
and only a small hiss in the speakers.
I actually repaired Delco car radios back in the late 1970s when I
worked for a local service shop while in high school. I have forgotten
much about these, but remember that for the most part, Delco radios
were reliable, and generally simple to fix.
With this radio, I am not sure where to start. A schematic wouyld be
helpful, but I do not havethe model, and do not know where to get
schematics.
Any advice, and assisatnce is appreciated.
Thanks,
Bill


Check the 5V regulator on the ETR board. Also, you need to feed it
continuous 12V on the separate two connector lead, on the orange wire.- Hide quoted text -

- Show quoted text -


Hey, Thanks Gary. I thought that might be a separate connector for the
power antenna. So I need to apply 12Vdc on both the input socket and
separate two conductor connector?

Any sources for a schematic?

Thanks again for your time, Bill



All times are GMT +1. The time now is 08:16 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter