 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Sears Branded VCR Stuck in "Stop"
My 10 year old [rarely used] LXI Model No 850 began to hang on ejecting
cassettes. [Has auto-load detect mechanism.] I replaced the old, cracked drive belt. Loads fine now, tape wraps around head for a few seconds, and then cassette goes through ejection sequence. TV display show "Stop" only, no picture even when tape fully engaged. I know this is a very cheap model but I'd rather fix as its used 6 X a year. Does any one have a suggestion as to why this is stuck in "stop"? Thank you. -- Remove -NOSPAM- to contact me. |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
Sears Branded VCR Stuck in "Stop"
Answer found in Goldwasser's Repair FAQs:
I was testing with the lid off and needed to block the stray light. All is well Thaank you Sam. -- Remove -NOSPAM- to contact me. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Sears/K-Mart Craftsman ratchetwrench "knucklebleeders" | Home Repair | |||
| Orange Peel Texture? "Knockdown" or "Skip Trowel" also "California Knock-down" | Home Repair | |||
| Panasonic VCR has snow in "play", picture OK in FF/ REW? | Electronics Repair | |||
| "Initial" Track on CD Rom Disk (Physical Stop or "Seek") | Electronics Repair | |||
| Schematic for "Video Wireless VCR Multiplier" | Electronics Repair | |||
Linear Mode
