DVD Burner issue
Hi All,
I have a Dell Dimentia 4700 with an onboard dvd/cd burner. I have yet to burn a dvd, but do use it fer cd's. I am using it to rip cd for mp3 use and about 3 days ago it had an odd sound to it, like fan was wacked. Today I took compressor blew out whole computer, the machine is now much much quieter. About the same time I noticed it was reading slow for ripping purposes. I noticed , But am not teckie enough to understand why , but it must have been spinning the drive a lot when not in use Two diff anto virus programs say no to virii, adaware and another find the usual assortment of crap and delete the stuff. SO I am wondering is the drive about to croak, or is in need of a drive belt, or lube job on the motor or rails? I believe it is a panasonic drive. I have fixed many vcr's and a belt job shouldn't be too devastating to do. Harder to get the belt then fix it ,(usually). any help appreciated respond here or to christiepontello:at:yahoo.com please put in subject line that this isbout the dvd drive ripping. thanks chris -------------= Posted from Ugroups.com =------------- ---= Fast & Free Web Portal to Usenet Newsgroups =--- -------------= http://www.ugroups.com/ =------------- |
DVD Burner issue
"christie punter" wrote in message ... About the same time I noticed it was reading slow for ripping purposes. I noticed , But am not teckie enough to understand why , but it must have been spinning the drive a lot when not in use Two diff anto virus programs say no to virii, adaware and another find the usual assortment of crap and delete the stuff. Try using EAC on a brand new CD and see what happens. http://www.exactaudiocopy.de/ |
DVD Burner issue
christie punter wrote:
Hi All, I have a Dell Dimentia 4700 with an onboard dvd/cd burner. I have yet to burn a dvd, but do use it fer cd's. I am using it to rip cd for mp3 use and about 3 days ago it had an odd sound to it, like fan was wacked. Today I took compressor blew out whole computer, the machine is now much much quieter. About the same time I noticed it was reading slow for ripping purposes. I noticed , But am not teckie enough to understand why , but it must have been spinning the drive a lot when not in use Two diff anto virus programs say no to virii, adaware and another find the usual assortment of crap and delete the stuff. SO I am wondering is the drive about to croak, or is in need of a drive belt, or lube job on the motor or rails? I believe it is a panasonic drive. I have fixed many vcr's and a belt job shouldn't be too devastating to do. Harder to get the belt then fix it ,(usually). any help appreciated respond here or to christiepontello:at:yahoo.com please put in subject line that this isbout the dvd drive ripping. thanks chris After killing a few CD-ROM drives in past years by blowing out computers with compressed air I'm always much more careful now and usually remove the optical drives first. Doesn't take much to stir up the dust and drive it into the optical pickup, once that happens you're best off to just buy a new drive, they're not easily serviced on that level. |
DVD Burner issue
Tim writes:
In article , lid says... Hi All, I have a Dell Dimentia 4700 with an onboard dvd/cd burner. I have yet to burn a dvd, but do use it fer cd's. I am using it to rip cd for mp3 use and about 3 days ago it had an odd sound to it, like fan was wacked. Today I took compressor blew out whole computer, the machine is now much much quieter. About the same time I noticed it was reading slow for ripping purposes. I noticed , But am not teckie enough to understand why , but it must have been spinning the drive a lot when not in use Two diff anto virus programs say no to virii, adaware and another find the usual assortment of crap and delete the stuff. SO I am wondering is the drive about to croak, or is in need of a drive belt, or lube job on the motor or rails? I believe it is a panasonic drive. I have fixed many vcr's and a belt job shouldn't be too devastating to do. Harder to get the belt then fix it ,(usually). any help appreciated respond here or to christiepontello:at:yahoo.com please put in subject line that this isbout the dvd drive ripping. thanks chris DVD burners do not have belts, they are direct drive. And yes the drive probably is near the end of it's life. Plan on getting a new one soon. That's one of the EOL symptoms, reccurrent reads to get the data read off properly. Try cleaning the lens manually (not a cleaning disc). --- sam | Sci.Electronics.Repair FAQ: http://www.repairfaq.org/ Repair | Main Table of Contents: http://www.repairfaq.org/REPAIR/ +Lasers | Sam's Laser FAQ: http://www.repairfaq.org/sam/lasersam.htm | Mirror Sites: http://www.repairfaq.org/REPAIR/F_mirror.html Important: Anything sent to the email address in the message header above is ignored unless my full name AND either lasers or electronics is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
All times are GMT +1. The time now is 03:50 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter