 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
power the LCD board with a computer ATX power???
I have a lcd monitor with bad internal power supply. The power supply
is responsible for 12V to the video board. And then the video board gives 12V to the inveter. The voltage on the power board is not very stable, it jumps around 11.56- 12.45V and causes the LCD to shut down and restart every 0.5 second. Question: Can i use a computer PC ATX power supply 12V to power the video board and turn on the LCD and verify the condition of video board ? Thanks! |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| atx power supply | Electronics Repair | |||
| ATX power supply on/off | Electronics Repair | |||
| dead power supply board in Computer Projector | Electronics Repair | |||
| ATX Power Supply. | Electronics Repair | |||
| ATX power supply for use outside of computer case. | Electronics Repair | |||
Threaded Mode
