HP 5190 flatbed scanner service info
does anyone have any service info for this scanner - schematics -
HP 5190 flatbed scanner service info - goes by model 5100cse it has 3 voltages from power supply - all of which are ~10% low - 5v = 4.5v 12v - 10.8v 24v = 22.1v when powered on scan light flashes once. when connected to computer - WinXP - nothing is recognized. tried reloading s/w & drivers - but computer doesn't see connection no new hardware found message. no imaging device in hardware manager. was working - just stopped. seems like parallel port busy line is active. all other ports appear to have correct logic level at idle. xtal oscillators appear to be running uses a Motorola 6811 processor. I have disconnected and reconnected all connectors and one plug in IC thanks for your help |
HP 5190 flatbed scanner service info
wrote in message ... when powered on scan light flashes once. when connected to computer - WinXP - nothing is recognized. Does WinXP support parallel port scanning? |
HP 5190 flatbed scanner service info
I guess it must,
"it was working, just stopped" On Sat, 03 Mar 2007 20:47:03 GMT, "Homer J Simpson" wrote: wrote in message .. . when powered on scan light flashes once. when connected to computer - WinXP - nothing is recognized. Does WinXP support parallel port scanning? |
All times are GMT +1. The time now is 11:01 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter