DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   receiver static (https://www.diybanter.com/electronics-repair/191269-receiver-static.html)

James Sweet February 4th 07 04:56 AM

receiver static
 
Well I worked on the KLH Fifty Five tonight that I posted about earlier.
Turns out it is in fact only in one channel which simplifies things
greatly and I tracked it with freeze spray down to a transistor marked
K40. I assume this is a 2SK40? I couldn't find much useful info but it
seems this is an N channel fet. Anyone know the pinout?

James Sweet February 4th 07 05:21 AM

receiver static
 
James Sweet wrote:
Well I worked on the KLH Fifty Five tonight that I posted about earlier.
Turns out it is in fact only in one channel which simplifies things
greatly and I tracked it with freeze spray down to a transistor marked
K40. I assume this is a 2SK40? I couldn't find much useful info but it
seems this is an N channel fet. Anyone know the pinout?



Well I just happened to have a few ZVNL11 mosfets in my stash so I
popped one in using the same orientation and it worked! I should
probably scope the outputs and see how they compare from one channel to
the next but it sounds pretty good to my ear so I think it'll be good
enough for grandma. Nice to have it fixed finally, it's been acting up
for over a decade and was unusable the last couple years.


All times are GMT +1. The time now is 06:42 PM.

Powered by vBulletin® Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter