Envision EN-710e
On Tue, 16 Jan 2007 17:57:09 -0500, Bill W. wrote:
My Dad has an old monitor he would like repaired. This Envision 710-e has the following symptoms: raster is very dim and has decreased by about one-third, not a front panel adjustment problem. diagonal lines across what is left of the raster. hissing sound coming from transformer (not flyback) in SMPS. I swapped the transformer from my (same model) monitor and it didn't help. I also checked semiconductors with a multimeter (I know, not much of a test) and didn't find any shorts or opens. I also checked electrolytic caps with an ESR meter and they seem to be O.K. Can anyone help fix this old monitor? The landfill doesn't need any more electronics tossed in it. Thanks for any help! Try replacing C907 150uF 400v. I have seen a few of these caps fail with the symptoms you have....ESR checks usually find it though. Good luck. |
All times are GMT +1. The time now is 05:31 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter