Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to sci.electronics.repair
external usenet poster
 
Posts: 2
Default Modulator PAL B/G 6.5 MHZ sound spacing to B/G 5.5 or 6 Mhz s. spacing

I have a small broadcast CABLE tv system. Using 12 Modulators
which accept 12 Audio /Video signals and output composite RF signal.
Each RF output of each Modulator will then feed a signal mixer. So
there are 12 channels. The system is PAL B/G with 6.5 sound spacing.
The problem is that most of the users have only PAL B/G 6 mhz
Televisions. So the users can get the video picture but no sound OR
SOUND WITH TERRIBLE HUMMING
Question is how I can tune the modulator with 6.5 mhz of sound spacing
TO SOUND SPACING 5.5 OR 6 MHZ.

PETER

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
TV sound problem James Electronics Repair 4 July 10th 06 08:45 AM
RCA sound problems [email protected] Electronics Repair 6 February 18th 06 02:02 AM
Another shop comfort: Sound Larry Blanchard Woodworking 43 December 7th 05 12:17 AM
No Sound Rca ctc177ag Woodward Electric Electronics Repair 1 November 26th 04 02:42 AM
Simple question regarding Ceiling tiles and sound? lbbs UK diy 5 March 26th 04 02:36 AM


All times are GMT +1. The time now is 09:10 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"