This set is about 6 years old, it came in with a pure white raster caused by
a blown video IC and lack of cathode supply. With those problems fixed, the
set works but has another, unusual problem; it only responds to remote
commands every few seconds. For example, push volume and the volume might go
up one notch; keep holding it and it will not adjust any further. To turn
the volume way up, you have to keep pressing Vol. repeatedly on the remote,
and not too quickly either. I tried two other remotes (one original, one
universal) and got the exact same result. I tried replacing the IR sensor
module with one from another Samsung chassis, with no change. Any ideas?

--
To reply via Email, remove NOSPAM from the address

Another one goes to the landfill........

"Chris F." wrote in message
...
This set is about 6 years old, it came in with a pure white raster caused
by a blown video IC and lack of cathode supply. With those problems fixed,
the set works but has another, unusual problem; it only responds to remote
commands every few seconds. For example, push volume and the volume might
go up one notch; keep holding it and it will not adjust any further. To
turn the volume way up, you have to keep pressing Vol. repeatedly on the
remote, and not too quickly either. I tried two other remotes (one
original, one universal) and got the exact same result. I tried replacing
the IR sensor module with one from another Samsung chassis, with no
change. Any ideas?

--
To reply via Email, remove NOSPAM from the address