REQ: BOSS tu-12 tuner PCB info
I have a BOSS TU-12 tuner with broken PCB traces around the surface-mount
chip. I've accounted for all pins except for one. With the lower casing removed and the PCB aligned so that the writing on the chip (and PCB) is directly readable, the pin I need to know about is the 3rd pin from the top on the East edge of the chip. Is it connected to the top 2 pins (that connect to the negative side of C7) or is it connected to the pin immediately below (that goes to the bottom of R21)? If anybody has a scan of the PCB or is willing to ease the lower casing off of their TU-12 and take a look, I'd be grateful. Thanks, Elmo' 7#9 |
All times are GMT +1. The time now is 01:11 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter