TDS544A Data Acquisition Board failure
Does anyone have information about repairing a Tektronix TDS544A
oscilloscope (schematics, common failures, ...) ? |
TDS544A Data Acquisition Board failure
Christophe Niclaes schrieb: Does anyone have information about repairing a Tektronix TDS544A oscilloscope (schematics, common failures, ...) ? Schematics are not possible to get for most of us. See a few older postings covering this here in s.e. Faults I had to repair myself in a some TDS5xx: power supply (dead SMPS), and a lot of failed caps on the boards. hth, Andreas |
TDS544A Data Acquisition Board failure
"Andreas Tekman" wrote in
oups.com: Christophe Niclaes schrieb: Does anyone have information about repairing a Tektronix TDS544A oscilloscope (schematics, common failures, ...) ? Schematics are not possible to get for most of us. See a few older postings covering this here in s.e. Faults I had to repair myself in a some TDS5xx: power supply (dead SMPS), and a lot of failed caps on the boards. hth, Andreas It is possible that the TDS544A was sold to the US military,and if that is the case,they contract to have component-level schematics included in their "service" manuals.That happened for a TDS3xx series scope model. How to determine this or get the gov't part number for the manual,I don't know. I believe the USAF PMEL cal labs,if they do still exist,would have the data.If you could hunt down the phone number for a PMEL lab,then they might help. -- Jim Yanik jyanik at kua.net |
All times are GMT +1. The time now is 03:38 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter