Source for filter caps
 

Hello all,

I looking for a vender for 10000uf, 100V(or better) caps for
replacements in my TFM-35. I want to stick with the original
configuration (radial) but could adapt axials as required. Don't need
black gates or whatever; but, I don't want to put in bottom shelf
pieces, either. Any suggestions?

Thanks,

Ernst

Source for filter caps
 

wrote:
Hello all,

I looking for a vender for 10000uf, 100V(or better) caps for
replacements in my TFM-35. I want to stick with the original
configuration (radial) but could adapt axials as required. Don't need
black gates or whatever; but, I don't want to put in bottom shelf
pieces, either. Any suggestions?

Thanks,

Ernst

Digikey carrys a lot of this type capacitor. Check out the on-line
catalogue page at this link:

http://dkc3.digikey.com/PDF/T063/1192.pdf

Expect to pay from 10 - 15 USD for these.

- mkaras

Source for filter caps
 

wrote in message
ups.com...
Hello all,

I looking for a vender for 10000uf, 100V(or better) caps for
replacements in my TFM-35. I want to stick with the original
configuration (radial) but could adapt axials as required. Don't need
black gates or whatever; but, I don't want to put in bottom shelf
pieces, either. Any suggestions?

Thanks,
Ernst

Ernst -

IF you are based in North America, the CDE web site (just recently
updated) -- offers a comprehensive selection of capacitors for restoration
work or new designs
http://www.cde.com/new/

Here is the CDE aluminum electrolytic radial selection, by model numbers:
http://www.cde.com/new/catalog/alum/#radial

I would also suggest downloading and reading
the engineering technical papers written by:
Sam Parler and Lairs Macomber

They now have a JAVA based Life and Temperature calculator -- useful for
correct replacements or upgrades.

CDE has an extensive distributor and dealer network (e.g. Mouser, Newark,
Allied, DigiKey) throughout the USA and Canada.

g. beat

Source for filter caps
 

wrote:

Hello all,

I looking for a vender for 10000uf, 100V(or better) caps for
replacements in my TFM-35. I want to stick with the original
configuration (radial) but could adapt axials as required. Don't need
black gates or whatever; but, I don't want to put in bottom shelf
pieces, either. Any suggestions?

uk.farnell.com

Graham

Source for filter caps
 

Eeyore wrote:

wrote:

Hello all,

I looking for a vender for 10000uf, 100V(or better) caps for
replacements in my TFM-35. I want to stick with the original
configuration (radial) but could adapt axials as required. Don't need
black gates or whatever; but, I don't want to put in bottom shelf
pieces, either. Any suggestions?

uk.farnell.com

Graham


He's in the US, donkey. Go troll another group.


--
Service to my country? Been there, Done that, and I've got my DD214 to
prove it.
Member of DAV #85.

Michael A. Terrell
Central Florida