I have two remote controls one rca for my Proscan (RCA) 27" tv, and one for
my Panasonic DVD player/recorder. My DVD player is able to control the
basics of my TV operation too, even will turn on the power to the TV (no
programming required). But now all of a sudden they both stop working.
My DVD remote still works fine for the DVD controls, but not for the TV any
more. Batteries is not the problem. Any ideas what it could be? The TV
is almost 10 years old.

"auto" [email protected] wrote in message
...
I have two remote controls one rca for my Proscan (RCA) 27" tv, and one for
my Panasonic DVD player/recorder. My DVD player is able to control the
basics of my TV operation too, even will turn on the power to the TV (no
programming required). But now all of a sudden they both stop working.
My DVD remote still works fine for the DVD controls, but not for the TV
any
more. Batteries is not the problem. Any ideas what it could be? The
TV
is almost 10 years old.


Is the tiny plastic lens over the IR sensor of the tv fogged over from
cleaners? Or if you can take the back off, find where the IR sensor
connects to the chassis, and remove it and re-connect it - The plug may have
absorbed moisture and caused a little corrosion. JTT

auto [email protected] wrote in message
...
I have two remote controls one rca for my Proscan (RCA) 27" tv, and one
for
my Panasonic DVD player/recorder. My DVD player is able to control the
basics of my TV operation too, even will turn on the power to the TV (no
programming required). But now all of a sudden they both stop working.
My DVD remote still works fine for the DVD controls, but not for the TV
any
more. Batteries is not the problem. Any ideas what it could be? The
TV
is almost 10 years old.



You've probably put the TV in an illegal mode by the wrong r/c button
combination. I can do that on my own TV by trying to go into teletext mode
on a 'universal' r/c. It only half switches to teletext, the mode is
displayed on the TV's chassis display but no on-screen display and latch up
on all functions. Returns to normal after switch off but perhaps yours has
over-ridden the default setting so stays even after switch off and on.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/

N Cook wrote in message
...
auto [email protected] wrote in message
...
I have two remote controls one rca for my Proscan (RCA) 27" tv, and one
for
my Panasonic DVD player/recorder. My DVD player is able to control the
basics of my TV operation too, even will turn on the power to the TV (no
programming required). But now all of a sudden they both stop
working.
My DVD remote still works fine for the DVD controls, but not for the TV
any
more. Batteries is not the problem. Any ideas what it could be? The
TV
is almost 10 years old.



You've probably put the TV in an illegal mode by the wrong r/c button
combination. I can do that on my own TV by trying to go into teletext mode
on a 'universal' r/c. It only half switches to teletext, the mode is
displayed on the TV's chassis display but no on-screen display and latch
up
on all functions. Returns to normal after switch off but perhaps yours has
over-ridden the default setting so stays even after switch off and on.

--
Diverse Devices, Southampton, England
electronic hints and repair briefs , schematics/manuals list on
http://home.graffiti.net/diverse:graffiti.net/




addendum
If you normally switch the TV 'off' to standby , try unplugging the TV for
an hour