ground wire extension (anti-static ground)
If I want to make an extension for my ground wire (which I use with for
anti-static grounding purposes) what type of wire do I need to use? I don't know what the gauge or type of wire that is used in the ground wire (no markings on wire) but it is the standard ground wire that comes with an anti-static mat with snap-on connector. |
ground wire extension (anti-static ground)
"toronado455" wrote in message oups.com... If I want to make an extension for my ground wire (which I use with for anti-static grounding purposes) what type of wire do I need to use? I don't know what the gauge or type of wire that is used in the ground wire (no markings on wire) but it is the standard ground wire that comes with an anti-static mat with snap-on connector. Use any wire you have. The smallest guage you have will be big enough electrically. An anit-static strap or mat will have a very large value resistor (around 1 meg) between the strap and the end of the wire. You probably should use insulated wire just in case it comes into contact with a live circuit. |
ground wire extension (anti-static ground)
toronado455 wrote:
If I want to make an extension for my ground wire (which I use with for anti-static grounding purposes) what type of wire do I need to use? I don't know what the gauge or type of wire that is used in the ground wire (no markings on wire) but it is the standard ground wire that comes with an anti-static mat with snap-on connector. I always used 16 AWG, to reduce the risk of it breaking and losing the antistatic protection. I used to test and repair the wiring on about 100 benches, and about 145 mats every three months. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
ground wire extension (anti-static ground)
Michael A. Terrell wrote:
toronado455 wrote: If I want to make an extension for my ground wire (which I use with for anti-static grounding purposes) what type of wire do I need to use? I don't know what the gauge or type of wire that is used in the ground wire (no markings on wire) but it is the standard ground wire that comes with an anti-static mat with snap-on connector. I always used 16 AWG, to reduce the risk of it breaking and losing the antistatic protection. I used to test and repair the wiring on about 100 benches, and about 145 mats every three months. That's why I use bare solid copper wire. It will definitely not break without someone noticing (the wire is located so that nothing should come into contact with it). |
ground wire extension (anti-static ground)
Jussi Peltola wrote:
Michael A. Terrell wrote: toronado455 wrote: If I want to make an extension for my ground wire (which I use with for anti-static grounding purposes) what type of wire do I need to use? I don't know what the gauge or type of wire that is used in the ground wire (no markings on wire) but it is the standard ground wire that comes with an anti-static mat with snap-on connector. I always used 16 AWG, to reduce the risk of it breaking and losing the antistatic protection. I used to test and repair the wiring on about 100 benches, and about 145 mats every three months. That's why I use bare solid copper wire. It will definitely not break without someone noticing (the wire is located so that nothing should come into contact with it). We ran 8 AWG bare copper along a row of benches, but used insulated wire soldered to the ground buss so there was no chance of it shorting out other wiring. Some benches had over 40 pieces of test equipment on them, and hundreds of cables run both over and under the bench. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida |
ground wire extension (anti-static ground)
Michael A. Terrell wrote: Jussi Peltola wrote: Michael A. Terrell wrote: toronado455 wrote: If I want to make an extension for my ground wire (which I use with for anti-static grounding purposes) what type of wire do I need to use? I don't know what the gauge or type of wire that is used in the ground wire (no markings on wire) but it is the standard ground wire that comes with an anti-static mat with snap-on connector. I always used 16 AWG, to reduce the risk of it breaking and losing the antistatic protection. I used to test and repair the wiring on about 100 benches, and about 145 mats every three months. That's why I use bare solid copper wire. It will definitely not break without someone noticing (the wire is located so that nothing should come into contact with it). We ran 8 AWG bare copper along a row of benches, but used insulated wire soldered to the ground buss so there was no chance of it shorting out other wiring. Some benches had over 40 pieces of test equipment on them, and hundreds of cables run both over and under the bench. -- Service to my country? Been there, Done that, and I've got my DD214 to prove it. Member of DAV #85. Michael A. Terrell Central Florida Thanks to all for the info. |
All times are GMT +1. The time now is 02:15 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter