UPDATE: 11 Meter to 10 Meter Yagi Antenna Conversion
 

Hi MC,

You are right, but I used the "how much to remove/reduce" approach.

Brad

On Sun, 18 Jun 2006 15:49:40 -0400, in sci.electronics.repair you wrote:


"Brad" wrote in message
...
Hi,

I did some research. Using the center frequency of the CB band with the
intention of adjusting the 11 meter yagi for a "center" frequency of 28.8
(my
point of interest), I have found that I should multiply the overall
length of
each element (or spacing) by 5.61%. Example: If the overall reflector
length
is 18.008 feet (11 meters), I should reduce the overall length to 16.998
FT.
(1.01 feet difference). 18.008 X .0561 (5.61%) = 1.01 feet

Brad

You mean multiply by about 94.39%, don't you?