DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Help, gateway solo 5300 overheated and now displays lines (https://www.diybanter.com/electronics-repair/162660-help-gateway-solo-5300-overheated-now-displays-lines.html)

[email protected] May 20th 06 04:44 PM

Help, gateway solo 5300 overheated and now displays lines
 
The laptop overheated yesterday and when I finally got to it I saw the
pattern that is in this photo , I am uhttp://tinyurl.com/rfnjz I am
using it at the moment with an external monitor, so it's obviosly not
the video card, I suspect most likely it is the mainboard component
that connects to the drake that connects to the LCD and if that's the
case then the mainboard will have to be replaced, or could it be the
LCD itself?

Any thoughts?

Thanks


Jerry G. May 20th 06 07:34 PM

Help, gateway solo 5300 overheated and now displays lines
 
For the LCD display there is a display matrix circuit. This is usualy
an intergal part of the mother board, or is part of the display panel
itself. You should get in touch with the Gateway tech support and find
out what you need. Most likely they may not sell the parts to you, but
will ask you to ship them the computer for them to service it, or they
will send you to their authorised rep.


Jerry G.
======


bloggybob May 20th 06 08:05 PM

Help, gateway solo 5300 overheated and now displays lines
 
No ... i had the same problem with one i repaired and it was a bad cable ..
and IF that doesnt fix it , then your lcd is bad ... ive never seen a bad
vid board or motherboard cause this on the gateways ...

take care ..





"Jerry G." wrote in message
oups.com...
For the LCD display there is a display matrix circuit. This is usualy
an intergal part of the mother board, or is part of the display panel
itself. You should get in touch with the Gateway tech support and find
out what you need. Most likely they may not sell the parts to you, but
will ask you to ship them the computer for them to service it, or they
will send you to their authorised rep.


Jerry G.
======




bloggybob May 20th 06 08:09 PM

Help, gateway solo 5300 overheated and now displays lines
 
also let me add .. ebay is where i get all my parts for laptops ... you can
get a cable there and if in fact you do need the lcd , the numbers on the
back of the lcd itself is what you would search for on ebay as they use many
different screens in these models ...

regards .. bob


"bloggybob" wrote in message
...
No ... i had the same problem with one i repaired and it was a bad cable

...
and IF that doesnt fix it , then your lcd is bad ... ive never seen a bad
vid board or motherboard cause this on the gateways ...

take care ..





"Jerry G." wrote in message
oups.com...
For the LCD display there is a display matrix circuit. This is usualy
an intergal part of the mother board, or is part of the display panel
itself. You should get in touch with the Gateway tech support and find
out what you need. Most likely they may not sell the parts to you, but
will ask you to ship them the computer for them to service it, or they
will send you to their authorised rep.


Jerry G.
======






[email protected] May 20th 06 11:12 PM

Help, gateway solo 5300 overheated and now displays lines
 
If you are talking about what is known as a "drake" the cable that
connects the LCD to the mainboard, then I just replaced one with one I
bought on where else, but Ebay, I don't think it's the drake since
there is a signal going to the LCD and it lights up, I'm more inclined
to suspect a component on the mainboard or the LCD itself, I can always
find parts on Ebay, but the problem is to know which part I need of
course.

Thanks


[email protected] May 21st 06 03:39 AM

Help, gateway solo 5300 overheated and now displays lines
 
Forgot to mention that before it overheated it was going from bright
white to normal, which it still does go from bright white to the line
patterns, but I don't think the issues are related, but who knows?


bloggybob May 21st 06 06:01 AM

Help, gateway solo 5300 overheated and now displays lines
 
ahhh .. ok then i know for sure 100 percent that it is a bad lcd ... replace
the lcd and you will be smiling on that gateway again .... the circuit board
on the back is failing and you cant replace it .. it is built with the lcd
attached ...

regards





wrote in message
ups.com...
Forgot to mention that before it overheated it was going from bright
white to normal, which it still does go from bright white to the line
patterns, but I don't think the issues are related, but who knows?





All times are GMT +1. The time now is 05:18 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter