DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Repairing a vintage solid-state guitar amplifier (https://www.diybanter.com/electronics-repair/145892-repairing-vintage-solid-state-guitar-amplifier.html)

[email protected] February 22nd 06 12:01 PM

Repairing a vintage solid-state guitar amplifier
 
Hi, I'm attempting to fix a Rickenbacker TR75 GT amplifier, circa 1971.
The power amp is dead. The output power transistors have gone CE
closed-circuit and power resistors in the output are open circuit. I
think the previous owner shorted the output. Other components seem OK,
as far as I can test them.

Luckily, there's a schematic: -

http://www.rickenbacker.com/pdfs/19345.pdf

The 2N5988 and 2N5991 transistors are unavailable except at great
expense from vintage parts suppliers. I'm not gonna pay big bucks for
them, because (a) I might blow them and cry, (b) it would be cheaper
just to buy a ready-made power amp module and use that.

I hoped that some cheap BD441/442 transistors might be sufficient for
me to find out if the rest of the circuit was OK. They are at least
rated for the voltage (73 volts rail-to-rail). But putting them, and
new 0.27R resistors, in the circuit and powering-up resulted in smoke.
I guess their characteristics (higher gain, lower current) are too
different, or there's something else wrong with the circuit. At least I
only blew up a few pence/cents worth of components.

Any suggestions about equivalent transistors at sensible price? Any
ideas how I can try things out while minimising the chance of more
fireworks?

I suspect I'll end up with Plan B - replace the whole power amp with a
modern one. But it would be nice to fix the original instead.


Dave Plowman (News) February 22nd 06 01:22 PM

Repairing a vintage solid-state guitar amplifier
 
In article .com,
wrote:
I hoped that some cheap BD441/442 transistors might be sufficient for
me to find out if the rest of the circuit was OK. They are at least
rated for the voltage (73 volts rail-to-rail). But putting them, and
new 0.27R resistors, in the circuit and powering-up resulted in smoke.
I guess their characteristics (higher gain, lower current) are too
different, or there's something else wrong with the circuit. At least I
only blew up a few pence/cents worth of components.


Any suggestions about equivalent transistors at sensible price? Any
ideas how I can try things out while minimising the chance of more
fireworks?


The power amp appears to be direct coupled so I'd guess a few blown up
transistors back down the line too.

--
*Women who seek to be equal to men lack ambition.

Dave Plowman London SW
To e-mail, change noise into sound.

TimPerry February 22nd 06 03:36 PM

Repairing a vintage solid-state guitar amplifier
 

"Dave Plowman (News)" wrote in message
...
In article .com,
wrote:
I hoped that some cheap BD441/442 transistors might be sufficient for
me to find out if the rest of the circuit was OK. They are at least
rated for the voltage (73 volts rail-to-rail). But putting them, and
new 0.27R resistors, in the circuit and powering-up resulted in smoke.
I guess their characteristics (higher gain, lower current) are too
different, or there's something else wrong with the circuit. At least I
only blew up a few pence/cents worth of components.


Any suggestions about equivalent transistors at sensible price? Any
ideas how I can try things out while minimising the chance of more
fireworks?


use a variac (variable AC source) to slowly bring the voltage up. wire a
light bulb in series with it. (about 100W for this case i guess) if the lamp
starts to glow brightly when you bring up the voltage with no audio signal
then something is still wrong.




The power amp appears to be direct coupled so I'd guess a few blown up
transistors back down the line too.






--
*Women who seek to be equal to men lack ambition.

Dave Plowman London SW
To e-mail, change noise into sound.




Just Another Theremin Fan February 22nd 06 03:58 PM

Repairing a vintage solid-state guitar amplifier
 
The power amp appears to be direct coupled so I'd guess a few blown up
transistors back down the line too.


Some amplifiers of this vintage were DC couple all the way back to the
pre-amp'. The only sure way to repair them was to replace every
transistor
on board and very carefully check all resisistors and caps' before
firing up.

You may also find such devices as pots to balance the output
transistors
bias which if not properly set will again send out smoke signals.

The things really were a pain in the arse with some amps' blowing up
even
if the loudspeakers were left disconnected!


Ancient_Hacker February 22nd 06 04:31 PM

Repairing a vintage solid-state guitar amplifier
 
for the NPN, the MJE270 looks good-- same case and higher voltage. and
48 cents!

for the PNP try MJE172, a whopping 68 cents at digi-key.

Do check all the other transistors... there's usually a few more with
dead shorts, easily found by an ohmmeter.

And do power it up gradually and check the voltages along the way to
prevent another blowup.


Just Another Theremin Fan February 22nd 06 05:31 PM

Repairing a vintage solid-state guitar amplifier
 
Yes, there is a "DC Balance" preset and a "Bias" preset.
Oh, it all sounds too hard. Plan B beckons.


If you do carry on make sure you check the bias pot for
dead spots. If they go O/C they effectively switch the
OP transistors hard on - BANG!

You are either a brave man or an idiot trying to repair it!


Geo February 22nd 06 06:25 PM

Repairing a vintage solid-state guitar amplifier
 
On 22 Feb 2006 04:01:40 -0800, wrote:

snip
I hoped that some cheap BD441/442 transistors might be sufficient for
me to find out if the rest of the circuit was OK. They are at least
rated for the voltage (73 volts rail-to-rail). But putting them, and
new 0.27R resistors, in the circuit and powering-up resulted in smoke.
I guess their characteristics (higher gain, lower current) are too
different, or there's something else wrong with the circuit. At least I
only blew up a few pence/cents worth of components.

Was it the new resistors that smoked?
Have your new transistors both gone short circuit or did you beat them to the
switch off?
I would try temporary insertion of much higher value resistors instead of the
0R27s e.g a couple of 1/2w 3k9. This should enable you to check through with a
DC meter (no signal) to see which of the drivers are dead.

Geo

Just Another Theremin Fan February 22nd 06 09:13 PM

Repairing a vintage solid-state guitar amplifier
 
I would try temporary insertion of much higher value resistors instead of the
0R27s e.g a couple of 1/2w 3k9.


AIR One other way to disable the O/P transistors while testing is to
simply
short both bases together.


[email protected] February 23rd 06 09:28 AM

Repairing a vintage solid-state guitar amplifier
 
In light of people's responses, I looked again at the circuit and could
see that it does all look rather fragile. Although I am an electronic
engineer by education, I don't have all the test gear (Variac etc.) and
stocks of components that I used to. So I have decided to take the
coward's way out and replace the power amp by a ready-made module. I've
been able to find one of the right rating that works with the same
mains transformer as the amp already has, keeping the cost and
modifications to a minimum.

I just wanted to thank everyone for their help and excellent
suggestions. I'll be better informed for my next project, certainly.


Ron(UK) February 23rd 06 12:14 PM

Repairing a vintage solid-state guitar amplifier
 
wrote:
In light of people's responses, I looked again at the circuit and could
see that it does all look rather fragile. Although I am an electronic
engineer by education, I don't have all the test gear (Variac etc.) and
stocks of components that I used to. So I have decided to take the
coward's way out and replace the power amp by a ready-made module. I've
been able to find one of the right rating that works with the same
mains transformer as the amp already has, keeping the cost and
modifications to a minimum.

I just wanted to thank everyone for their help and excellent
suggestions. I'll be better informed for my next project, certainly.


As a matter of interest, which module did you use?

Ron(UK)

--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com

[email protected] February 23rd 06 03:57 PM

Repairing a vintage solid-state guitar amplifier
 
http://www.velleman.be/ot/en/product/view/?id=360356

(The description of a "200W" amplifier is marketing BS. It's actually a
70-100W amp, ideal for the Rick which was originally 75W).


Just Another Theremin Fan February 23rd 06 04:47 PM

Repairing a vintage solid-state guitar amplifier
 

wrote:

(The description of a "200W" amplifier is marketing BS. It's actually a
70-100W amp, ideal for the Rick which was originally 75W).


It all depends on how you measure the power doesn't it? Are we talking
of
power input, RMS output or peak music power?

In the days of the amp' mentioned manufacturers (and sellers) could
juggle with these figures all day long to come out with ridiculous
figures and an ignoramus customer would
often be shown the ac power input which due to the sheer inefficiencies
of the day
could be 3 times the RMS output figure. Peak music power could be
quoted as 3 times this again! Fun eh?


Ron(UK) February 23rd 06 05:21 PM

Repairing a vintage solid-state guitar amplifier
 
wrote:
http://www.velleman.be/ot/en/product/view/?id=360356

(The description of a "200W" amplifier is marketing BS. It's actually a
70-100W amp, ideal for the Rick which was originally 75W).


Hmm CPC dont seem to stock them, I wonder how they stand up to abuse.
I much regret the discontinuation of the Maplin 150watt Mosfet Amp which
was perfect for resurecting old 70`s H=H and Carlsbro amps. I must have
built well over 50 of those kits.

Ron(UK)

--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com

Michael Ware February 23rd 06 11:39 PM

Repairing a vintage solid-state guitar amplifier
 

wrote in message
oups.com...
http://www.velleman.be/ot/en/product/view/?id=360356

(The description of a "200W" amplifier is marketing BS. It's actually a
70-100W amp, ideal for the Rick which was originally 75W).

Keep in mind, he's using it as a quitar amp, not a hi-fi or PA amp. We don't
mind if it clips, in fact it's a desired effect.



[email protected] February 24th 06 01:14 PM

Repairing a vintage solid-state guitar amplifier
 

Ron(UK) wrote:

wrote:
http://www.velleman.be/ot/en/product/view/?id=360356

(The description of a "200W" amplifier is marketing BS. It's actually a
70-100W amp, ideal for the Rick which was originally 75W).


Hmm CPC dont seem to stock them, I wonder how they stand up to abuse.
I much regret the discontinuation of the Maplin 150watt Mosfet Amp which
was perfect for resurecting old 70`s H=H and Carlsbro amps. I must have
built well over 50 of those kits.


The Velleman kit is also from Maplin.

I built one of the 150watt MOSFET amps about 15 years ago and it served
me well for 10 years.

I can't give the same recommendation for this Vellman module, as it
just went up in smoke after working (with good undistorted sound coming
out and everything) for 5 minutes. No doubt I did something wrong, but
I'm completely at a loss to know what.

Completely disheartened. Giving up on whole project.


Dave Plowman (News) February 24th 06 07:27 PM

Repairing a vintage solid-state guitar amplifier
 
In article .com,
wrote:
The Velleman kit is also from Maplin.


Yes - but not a Maplin kit.

I built one of the 150watt MOSFET amps about 15 years ago and it served
me well for 10 years.


I've still got several in use around the country. ;-)

I really miss the genuine Maplin kits - they seemed to address holes in
the market, although probably only at that time. I dunno what killed them
off - perhaps the cost of CE approval, etc.

--
*Some people are only alive because it is illegal to kill.

Dave Plowman London SW
To e-mail, change noise into sound.

Ron(UK) February 25th 06 11:05 AM

Repairing a vintage solid-state guitar amplifier
 
Dave Plowman (News) wrote:
In article .com,
wrote:

The Velleman kit is also from Maplin.



Yes - but not a Maplin kit.


I built one of the 150watt MOSFET amps about 15 years ago and it served
me well for 10 years.



I've still got several in use around the country. ;-)

I really miss the genuine Maplin kits - they seemed to address holes in
the market, although probably only at that time.



I dunno what killed them off - perhaps the cost of CE approval, etc.

Shortage of the output mosfets I believe, I found a supply of bare
circuit boards at a ham radio fair rally some years ago.

Ron(UK)



--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com

Dave Plowman (News) February 25th 06 01:09 PM

Repairing a vintage solid-state guitar amplifier
 
In article ,
Ron(UK) wrote:
I really miss the genuine Maplin kits - they seemed to address holes in
the market, although probably only at that time.



I dunno what killed them off - perhaps the cost of CE approval, etc.


Shortage of the output mosfets I believe, I found a supply of bare
circuit boards at a ham radio fair rally some years ago.


2SK135 and 2SJ50 both in stock at RS components.

--
*Hard work pays off in the future. Laziness pays off now *

Dave Plowman London SW
To e-mail, change noise into sound.

Ron(UK) February 25th 06 02:09 PM

Repairing a vintage solid-state guitar amplifier
 
Dave Plowman (News) wrote:
In article ,
Ron(UK) wrote:

I really miss the genuine Maplin kits - they seemed to address holes in
the market, although probably only at that time.




I dunno what killed them off - perhaps the cost of CE approval, etc.



Shortage of the output mosfets I believe, I found a supply of bare
circuit boards at a ham radio fair rally some years ago.



2SK135 and 2SJ50 both in stock at RS components.


I dunno then, I dont think kits need CE approval especially if they
aren't mains powered, I could be wrong tho.

Some years ago I dismantled an old Studiomaster 1000watt mosfet
amplifier with a burnt out mains tranny, and that furnished me with
enough power mosfets to make about a dozen 150 watt modules up. I made
up some boards of my own with double the number of output devices which
proved quite sucessful too.

That same Hitachi[1] based design turns up in a multitude of guitar and
pa amps from the 80`s and 90`s virtually anything with the words mosfet
on the front. The actual output section rarely gives trouble. (IME)

[1] I believe.

Ron(UK)


--
Lune Valley Audio
Public address system
Hire, Sales, Repairs
www.lunevalleyaudio.com


All times are GMT +1. The time now is 08:16 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter