DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Zenith Projection TV Convergence Adjustments Help! (https://www.diybanter.com/electronics-repair/143005-zenith-projection-tv-convergence-adjustments-help.html)

Jean February 2nd 06 02:35 AM

Zenith Projection TV Convergence Adjustments Help!
 
Hi all. Can anyone tell me where the convergence adjustments are on a
Zenith PV800PG? Thanks, Jean.


oldfogie February 2nd 06 03:23 PM

Zenith Projection TV Convergence Adjustments Help!
 

"Jean" wrote in message
...
Hi all. Can anyone tell me where the convergence adjustments are on a
Zenith PV800PG? Thanks, Jean.

I'm not familiar with that model, but after around 1996 or so the
convergence is done in the service menu. No mechanical pots to adjust.



[email protected] February 2nd 06 05:01 PM

Zenith Projection TV Convergence Adjustments Help!
 
It is a 1985 vintage 3 tube front projector. It has a slide out board
with 20+ so called convergence controls on it. Under the best
circumstances the convergence will be marginal at best.

Do not forget those tubes used an optical Gel between the lens and crt
face for cooling. Most of those I saw 10 or so years ago the gel was
going bad and the convergence and image quality could not be acheived
without replacement of the entire crt assembly.


Jean February 3rd 06 12:43 PM

Zenith Projection TV Convergence Adjustments Help!
 
Thanks everyone for the responses. I guess there is not much I can do
with it. Thanks again! Jean.



All times are GMT +1. The time now is 02:46 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter