DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   NO VERTICAL DEFLECTION (https://www.diybanter.com/electronics-repair/140839-no-vertical-deflection.html)

[email protected] January 18th 06 03:10 PM

NO VERTICAL DEFLECTION
 
Hello!

I own a Philips 28PT532A TV and it is not working properly. A white
horizontal line appears in the screen, I suppose is something related
to the vertical scan but I donīt know how to fix it. Some idea?

Thank You


[email protected] January 18th 06 04:16 PM

NO VERTICAL DEFLECTION
 
iosuesparza:
You should go to the website for this newsgroup at
http://www.repairfaq.org/
there, plan to spend some search time looking over the wealth of
information relating to television troubleshooting and repair
proceedures.
If, after reading through the repairfaq, you are still not certain how
to proceed with your television repair, you should probably TAKE it to
a service shop for, at the very least, a repair cost estimate so you
can make an intelligent repair decision with fact instead of internet
guesses.
electricitym
- - - - - - - - - - - -


wrote:
Hello!

I own a Philips 28PT532A TV and it is not working properly. A white
horizontal line appears in the screen, I suppose is something related
to the vertical scan but I donīt know how to fix it. Some idea?

Thank You



spudnuty January 18th 06 10:00 PM

NO VERTICAL DEFLECTION
 

wrote:
Hello!

I own a Philips 28PT532A TV and it is not working properly. A white
horizontal line appears in the screen, I suppose is something related
to the vertical scan but I donīt know how to fix it. Some idea?

Thank You

Also check to see if there's a service/normal switch. Sometimes it's on
the CRT board others near the HV on the motherboard. If this switch is
on "service" the display will be a thin horizontal line.
Just had this on a Sanyo that I replaced the Vert scan IC on.
Richard


[email protected] January 18th 06 10:34 PM

NO VERTICAL DEFLECTION
 

wrote:

I own a Philips 28PT532A TV and it is not working properly. A white
horizontal line appears in the screen, I suppose is something related
to the vertical scan but I donīt know how to fix it. Some idea?


It's probably (but not definitely) a blown vertical output IC (follow
the wires from the yoke on the CRT to the circuit board) or a coupling
capacitor to the yoke (not all TVs have that cap. If you change this
chip, change the electrolytic capacitors around it as well.



All times are GMT +1. The time now is 08:13 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright Đ2004 - 2014 DIYbanter