Illico Explorer 2200 - Dead
My Scientific Atlanta Explorer 2200 decoder was completely dead. I
found the switching power supply faulty. The power supply board is located vertically on the side of the cabinet. I found U3 (ICE2A265 short on pin 7 VCC) and C19 (22uF, 50V with a very high ESR). I replaced those two parts and everythings is now OK. I found the ICE2A265 at Digi-Key. |
All times are GMT +1. The time now is 04:22 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter