Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
USB 2.0 is the first pin connected ?
in USB 2.0 to IDE notebook HD drive ,is the first two pins connected ?
TIA |
#2
|
|||
|
|||
USB 2.0 is the first pin connected ?
"LPC2106" wrote in message
... in USB 2.0 to IDE notebook HD drive are the first two pins connected ? TIA ALL FOUR pins on the USB connector are used (2 for power and 2 for the serial bus connection) A GOOGLE search on "USB connector standard provided these web pages: http://www.beyondlogic.org/usbnutshell/usb2.htm http://en.wikipedia.org/wiki/USB of interest to your request http://en.wikipedia.org/wiki/USB#Power_supply http://www.interfacebus.com/Design_Connector_USB.html |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Charging battery which is still connected | UK diy | |||
Underground wiring questions... | Home Repair | |||
RCD - all MCBs off (no L) + no N-output from RCD connected (no N) = still trips instantly | UK diy | |||
Additional instantaneous hot water units connected to combi boilers | UK diy | |||
Ground to Gas Pipe?? | Home Repair |