DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Zenith SR2773DT (https://www.diybanter.com/electronics-repair/124163-zenith-sr2773dt.html)

Bob Urz October 9th 05 10:00 PM

Zenith SR2773DT
 
Does anyone know how to get to the service menu on a Zenith
SR2773DT 27" color TV?

I need to try to do a color balance on it.

Bob

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

[email protected] October 9th 05 10:46 PM

Zenith SR2773DT
 
Menu-Menu (hold) then 9-8-7-6 enter after menu goes away.

Set factory mode to 1 to get into all the adjustments, set back to zero
before exiting.


Bob Urz October 14th 05 03:30 AM

Zenith SR2773DT
 


wrote:

Menu-Menu (hold) then 9-8-7-6 enter after menu goes away.

Set factory mode to 1 to get into all the adjustments, set back to zero
before exiting.

Thanks of the info. It took awhile, but i got into the menu.
Found out the color balance controls were NOT on the menu.
They appear to be on 3 small pots on the CRT board.

In my haste to find the controls in the service menu, I inadvertently
changed a setting from Zenith to PL (whatever PL is). Now the remote
control is dead front panel controls are still operational. But now i
cannot get back into the service menu. How can i reset this back to
zenith to regain use of the remote?

It still has some vert foldover issues, but i have not gone through
the board and ESR'ed the caps yet.

All help appreciated.

Bob
NSE

----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 120,000+ Newsgroups
----= East and West-Coast Server Farms - Total Privacy via Encryption =----

[email protected] October 14th 05 03:38 AM

Zenith SR2773DT
 
You need the Private Label remote control in order to access the
service mode to change it back.

PL = private label, brand name the same Zenith tv was sold under that
was not Zenith.

If you have a good universal remote control with a menu button that
will work a Zenith, it might have the private label code in it. You
might need to do a lot of code searches to find it. I think Montgomery
Wards was one private label brand , as well as several others.



All times are GMT +1. The time now is 11:12 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter