DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Tetronix 465B Scope and service-manuals (https://www.diybanter.com/electronics-repair/122817-tetronix-465b-scope-service-manuals.html)

ktl September 30th 05 10:06 PM

Tetronix 465B Scope and service-manuals
 
I found the service manual on the net, in the djvu-format, however
there seems to a couple of pages missing. There is references, in the
service manual for a number of Waveformes that isn't in the scanned
manual, anyone that knows whats up, or have the missing pages?

Tomas Larsson
Sweden

I have converted it to PDF, avaible at www.naks.mine.nu.


[email protected] October 1st 05 08:06 AM

I have a 465 service manual.. I don't know if it's a B but I know it's
not the 465M which is an entirely different machine. I'll be happy to
check it if you can give me page numbers.


ktl October 2nd 05 12:14 PM

It seems that the following schematics are missing, A&B
Trigg-generators (No 6), Horizontal Amplifier (No10), Curve formes
55-70 Sweep & Z axis Logic, Curve formes 91-93 CRT Circuit, 94-99 Power
Supply.

I would appreciate if someone have these pages.

Regards Tomas.


[email protected] October 3rd 05 03:15 AM

I did some digging around and I think that our scopes may be a tad
different. However, I do have all of those schematics for the 465
(except for the curve former; it's not listed in the contents), and
I'll scan them for you if you like. It'll take me a few days, though; I
don't have a scannner. They might be similar enough that you could use
them.

I can send you some not-very-pretty-but-probably-usable digital photos
of the pages in the meantime.


ktl October 3rd 05 07:27 AM

I've got the manual for the standard 465 as well, with schematics, but
they are quite different, the 465 is build more discrete, the 465B with
more IC's, as far as I can see. The problem is that the curve-formes
are not listed in the contents, for some funny reason. But thanks
anyway for your reply, and offer.



All times are GMT +1. The time now is 09:09 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter