Hakko 936/7 clones: Joho and Madell: What's up with these?
They look like copies of the Hakko - in fact they have the same "936"
model number. I think the Jono 936 sells for $55 everywhere. Any thoughts? Thanks Tom |
"tomhoo" wrote in message oups.com... They look like copies of the Hakko - in fact they have the same "936" model number. I think the Jono 936 sells for $55 everywhere. Any thoughts? Thanks Tom Last time I was at Fry's the real Hakko was only about $25 more, personally I'd just buy the real thing. |
I was happily using an ancient Hexacon 1001 ThermOTrac that gave up the
ghost - it worked real nice on motherboards. I'm waiting to see if it is worth getting repair at Hexacon but I guess that is going to cost more than its worth. I guess I'll have to decide if I'm going to find a cheap, used Hexacon 1001 or spend the bucks for a Hakko. |
"tomhoo" wrote in message
oups.com... They look like copies of the Hakko - in fact they have the same "936" model number. I think the Jono 936 sells for $55 everywhere. Any thoughts? Thanks Tom Aoyue (Chinese soldering mfg company) makes Haako clones -- http://www.aoyue.com/en/Product.asp?...LE%20SOLDERING Aoyue clone of the Haako 936-12 . http://www.aoyue.com/en/ArticleShow.asp?ArticleID=372 The Aoyue brand usually being seen on the market. These also appear to be sold under the Sunkko label. http://www.mobile-repairing.com/shop...number=2&id=53 Some places sell the Sunkko with a choice of "Chinese made" or "Hakko" (Japanese made) ceramic heaters (a difference of $19 dollars) ! http://www.mobile-repairing.com/shop...9daa967265fe38 Circuit Specialists was selling a 936-12 clone (CSI-Station1), but I see that this has been replaced by a different base design "A" (CSI-Station1A) http://www.circuitspecialists.com/prod.itml/icOid/7307 gb |
"tomhoo" wrote in message
oups.com... They look like copies of the Hakko - in fact they have the same "936" model number. I think the Jono 936 sells for $55 everywhere. Any thoughts? Thanks Tom I forgot to mention that Madell Tech is also selling a Hakko 936 clone station http://www.madelltech.com/m3-8.html gb |
I bought a couple Atten units that are identical to the Hakko. The have
worked fine. The tips interchange precisely. I suspect that they all use the same OEM. Leonard "James Sweet" wrote in message news:T%__e.18789$SG3.7572@trnddc07... "tomhoo" wrote in message oups.com... They look like copies of the Hakko - in fact they have the same "936" model number. I think the Jono 936 sells for $55 everywhere. Any thoughts? Thanks Tom Last time I was at Fry's the real Hakko was only about $25 more, personally I'd just buy the real thing. |
All times are GMT +1. The time now is 04:56 AM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter