Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Emerson VCR Ribbon Cable Solution
Just to add to the knowledge database. The ribbon cables on the Emerson
VCR board and deck can be disconnected. The terminals are a plastic housing containing one thin metal contact for each wire of the cable. These contacts arc downwards in the housing, so when the ribbon cable is inserted, the contacts lock the conductor in place. Removal is accomplished by rocking the ribbon cable gently side to side and gently pulling up. This causes the contacts to pull up, so they need to be re-shaped in the housing before reassembly. The ribbon cable wires are pre-tinned inside the sheath, and are quite fragile. Even a little bending causes the individual strands in each wire to start coming apart. So, the ribbon cable needs to be carefully stripped back so new wire can be re-inserted into the terminals. The terminal structure looks like this: I WIRE I I {__ I { { \ I { { \ { { \---{-CONTACT { \ { { \ { HOUSING -- -------------------------------------------------------------- Home Page: http://www.seanet.com/~jasonrnorth |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
CATV - Cable Signal Leak | Home Repair | |||
Using SWA cable | UK diy | |||
IDE Ribbon Cable | UK diy | |||
How to reattach LCD Ribbon Cable? | Electronics Repair | |||
Car aerial cable | UK diy |