Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #11   Report Post  
Old September 29th 05, 08:21 PM
Dave D
 
Posts: n/a
Default


"Asimov" wrote in message
...


There may be issues with tube biasing. Perhaps some off value
resistors or supply voltage. Turning down g2 might do it in a pinch.


He's talking about TFT monitors ;-)

Dave



  #12   Report Post  
Old September 29th 05, 09:06 PM
Alex Bird
 
Posts: n/a
Default


QJD1 wrote:

My options to repair my monitor are now
(in that particular order):

0. Acquiring schematics and other relevant information
1. Checking circuitry for defects or faulty components
2. Adding variable resistor (pot) in the dimming circuit
3. Applying black Sharpie magic marker (or similar) to the tubes
4. Mounting anti-glare screen in front of a monitor.


I don't know if it counts as a repair, more a mod really!

If it has double tubes top and bottom, you could halve the brightness
by simply disconnecting one of each. Cut the connector with a sharp
blade to connect one only. When that tube dies, you can just swap to
the reserve!

This photo shows a connector cut (to fit a different socket)
http://www.zen54410.zen.co.uk/linkfi...connectors.jpg
White wire is common.

You'd need a fairly serious pot to vary that supply, probably a
regulator controlled by a pot. You could also connect a PWM signal to
the enable/inhibit input on the inverter board for a potentially more
reliable result!

Good luck,
Alex



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
brightness on panasonic 32 inch tv from 1999 val Electronics Repair 7 August 16th 05 10:46 PM
Sony GDM-F520 - Brightness / clarity issue Raj Das Electronics Repair 1 July 14th 05 02:52 AM
Sony Trinitron brightness problems or old age? Wayne Peacock Electronics Repair 5 June 18th 04 06:24 PM
Excessive brightness in Monitor EPSON VGA mono [email protected] Electronics Repair 2 November 16th 03 12:29 AM
21" Monitor problem: Poor brightness. Dell D1626HT/ Sony GDM-500 chassis Sofie Electronics Repair 2 August 8th 03 04:40 AM


All times are GMT +1. The time now is 12:27 PM.

Powered by vBulletin® Copyright ©2000 - 2019, Jelsoft Enterprises Ltd.
Copyright 2004-2019 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017