DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   STR-GA9ESG Sony Receiver - displays "Protector" (https://www.diybanter.com/electronics-repair/120128-str-ga9esg-sony-receiver-displays-%22protector%22.html)

L Mehl September 8th 05 05:53 PM

STR-GA9ESG Sony Receiver - displays "Protector"
 
Hello --

This message started displaying a few days ago. Approx a year ago one of
the speaker channels started popping, so I changed Balance to 100% on the
other channel.

The operating instructions booklet only mentions the display, but offers no
troubleshooting information.

Is the "Protector" problem expensive to fix? Is it worth fixing this unit?

If it is a board-replace fix, can anyone suggest which component(s) to look
for, a supplier for parts and service manual?

Thanks for any help.

Larry Mehl



[email protected] September 8th 05 06:00 PM

If it does this with ALL the speakers disconnected then one of the
output channels has a problem. The unit needs troubleshot to the
component level and repaired. Any good technician with the service
manual in hand will be able to diagnose and repair the unit.

Until you get an accurate diagnosis and estimate, there is no way to
know if you think the unit is worth fixing.

Call any Sony authorized distributor for parts or service manual, like
TriTronics www.tritronicsinc.com. etc.


L Mehl September 9th 05 03:35 PM

Mark and D --

Thanks for the response and information.

Larry


"L Mehl" wrote in message
ink.net...
Hello --

This message started displaying a few days ago. Approx a year ago one of
the speaker channels started popping, so I changed Balance to 100% on the
other channel.

The operating instructions booklet only mentions the display, but offers

no
troubleshooting information.

Is the "Protector" problem expensive to fix? Is it worth fixing this

unit?

If it is a board-replace fix, can anyone suggest which component(s) to

look
for, a supplier for parts and service manual?

Thanks for any help.

Larry Mehl






All times are GMT +1. The time now is 12:34 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter