DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   Dead Samsung 15" TFT TV ? (https://www.diybanter.com/electronics-repair/119823-dead-samsung-15%22-tft-tv.html)

T i m September 5th 05 11:04 PM

Dead Samsung 15" TFT TV ?
 
Hi All,

I have been pointed in the direction of this n/g with the thought
there may be a 'known issue / fault' on the following model please?


Samsung 15 inch TFT TV.

Model code LW15M13CX/XEU
Model LW15M13C. S
Type No MU15EO

A friend bought one around 6 months ago and it recently failed. The
screen is 'blank' but the power is on and the remote changes the
channel judging by the audio.

The shop she bought it from as now gone and she has been quoted a
potential repair cost around the current price of a new replacement
;-(

All the best

T i m (London, UK)

James Sweet September 5th 05 11:37 PM


"T i m" wrote in message
...
Hi All,

I have been pointed in the direction of this n/g with the thought
there may be a 'known issue / fault' on the following model please?


Samsung 15 inch TFT TV.

Model code LW15M13CX/XEU
Model LW15M13C. S
Type No MU15EO

A friend bought one around 6 months ago and it recently failed. The
screen is 'blank' but the power is on and the remote changes the
channel judging by the audio.

The shop she bought it from as now gone and she has been quoted a
potential repair cost around the current price of a new replacement
;-(

All the best

T i m (London, UK)


If you put it in bright light (sunlight, spotlight, something) can you make
out a picture? If so then you need to look at the backlight tubes or
inverter.



T i m September 6th 05 08:17 AM

On Mon, 05 Sep 2005 22:37:34 GMT, "James Sweet"
wrote:



If you put it in bright light (sunlight, spotlight, something) can you make
out a picture? If so then you need to look at the backlight tubes or
inverter.

Ok, I'll ask her and see what she says, thanks.

All the best ..

T i m


T i m September 9th 05 12:40 PM

On Tue, 06 Sep 2005 07:17:14 GMT, T i m wrote:

On Mon, 05 Sep 2005 22:37:34 GMT, "James Sweet"
wrote:



If you put it in bright light (sunlight, spotlight, something) can you make
out a picture? If so then you need to look at the backlight tubes or
inverter.

Ok, I'll ask her and see what she says, thanks.

All the best ..

T i m


Hi All,

I got an email from my friend yesterday .....

quote

"Well, B****r me!

I forgot to do this when I got home last night, but then I woke up at
3.30 this morning and thought that I may as well try it as it is a
good time with it being dark etc.

So I switch on the TV, and blow me down if it didn't work!

Now, before you say anything, I had tried it several times over a
period of a few weeks and could not get it to do anything, I had tried
adjusting all sorts of things and had even followed the destruction
manual for this type of fault, but could not get it to work. ...
/quote.

So, I suppose time will tell ?

Thanks for the help ..

T i m


James Sweet September 9th 05 06:06 PM



Now, before you say anything, I had tried it several times over a
period of a few weeks and could not get it to do anything, I had tried
adjusting all sorts of things and had even followed the destruction
manual for this type of fault, but could not get it to work. ...
/quote.

So, I suppose time will tell ?



*sigh* tried adjusting things? Why do people *always* fiddle with alll the
adjustments when something breaks? Thankfully LCD's tend not to have
non-user adjustments accessible.

I suspect there's a bad solder joint or other intermittant problem on the
backlight inverter, the problem will crop up again.



T i m September 10th 05 12:50 AM

On Fri, 09 Sep 2005 17:06:16 GMT, "James Sweet"
wrote:



Now, before you say anything, I had tried it several times over a
period of a few weeks and could not get it to do anything, I had tried
adjusting all sorts of things and had even followed the destruction
manual for this type of fault, but could not get it to work. ...
/quote.

So, I suppose time will tell ?



*sigh* tried adjusting things? Why do people *always* fiddle with alll the
adjustments when something breaks?


Good question .. We stopped to help a fellow cyclist the other day and
it looked like the rear wheel had tried to eat his rear gear mech ;-(
He said 'I was just fiddling with the gears when .. " ;-)

Thankfully LCD's tend not to have
non-user adjustments accessible.


Indeed .. and just as well maybe ;-)

I suspect there's a bad solder joint or other intermittant problem on the
backlight inverter, the problem will crop up again.


Well, if it does at least we now have a better idea what might be
wrong .. ie it's not the backlights themselves?

All the best ..

T i m



All times are GMT +1. The time now is 02:04 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter