Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Panasonic CT25G controls won't work.
Following a power surge, our TV(Panasonic model CT25G) is frozen on one
channel. None of the controls work on the tv or on the remote. The picture and sound are excellent, but I can't change channels or control volume. I called for tech support and reset the remote, still no change. Pressing power and action brings up screen that says all systems ok. The setup screen shows up then but can't be used. A stereo receiver plugged into the same outlet was not damaged. Is there a way to reset the television? |
#2
|
|||
|
|||
Try unplugging the set for about 30 min, may help, otherwise you will need
to have the item serviced. "Sharynideas" wrote in message oups.com... Following a power surge, our TV(Panasonic model CT25G) is frozen on one channel. None of the controls work on the tv or on the remote. The picture and sound are excellent, but I can't change channels or control volume. I called for tech support and reset the remote, still no change. Pressing power and action brings up screen that says all systems ok. The setup screen shows up then but can't be used. A stereo receiver plugged into the same outlet was not damaged. Is there a way to reset the television? |
#3
|
|||
|
|||
It may be that there is damage to the control section. This involves
the uPC. This something that will require proper service using the proper facilities, and having TV service training. Jerry G. |
#4
|
|||
|
|||
It may be that there is damage to the control section. This involves
the uPC. This something that will require proper service using the proper facilities, and having TV service training. Jerry G. |
#5
|
|||
|
|||
It may be that there is damage to the control section. This involves
the uPC. This something that will require proper service using the proper facilities, and having TV service training. Jerry G. |
#6
|
|||
|
|||
It may be that there is damage to the control section. This involves
the uPC. This something that will require proper service using the proper facilities, and having TV service training. Jerry G. |
#7
|
|||
|
|||
It may be that there is damage to the control section. This involves
the uPC. This something that will require proper service using the proper facilities, and having TV service training. Jerry G. |
#8
|
|||
|
|||
Art wrote: Try unplugging the set for about 30 min, may help, otherwise you will need to have the item serviced. "Sharynideas" wrote in message oups.com... Following a power surge, our TV(Panasonic model CT25G) is frozen on one channel. None of the controls work on the tv or on the remote. The picture and sound are excellent, but I can't change channels or control volume. I called for tech support and reset the remote, still no change. Pressing power and action brings up screen that says all systems ok. The setup screen shows up then but can't be used. A stereo receiver plugged into the same outlet was not damaged. Is there a way to reset the television? |
#9
|
|||
|
|||
I unplugged it for 1, then 12, then 24 hours. No change. I live over 50 miles from any Panasonic repair place. With the gas price it's cheaper to buy a new television. I was just hoping for a user friendly fix. Thanks. |
#10
|
|||
|
|||
Microprocessor, E-Prom, Any zener diodes connected to the control or data
lines into and out of the micro. Corroded or stuck tac switches at the keypad, etc. Generally you need to get into the set and do some in-depth diagnosis, post the actual results that your find while doing the diagnosis, and then we may be capable of giving more than just generic responses. There is no golden witchie board that we can use to remotely diagnose and fix the set. "Jerry G." wrote in message oups.com... It may be that there is damage to the control section. This involves the uPC. This something that will require proper service using the proper facilities, and having TV service training. Jerry G. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Panasonic CTN-2056S Convergence off - serviceman mode doesnt work | Electronics Repair | |||
Panasonic CTN-2056S Convergence off - serviceman mode doesnt work | Electronics Repair | |||
How can I get a contractor to FINISH?!?!? | Home Ownership | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
AG 7350 and Sony Editor ? Qustion for Sony god's or Panasonic god's. | Electronics Repair |